MKS Servos DS1009 Standard Digital Cyclic Servo

This is the MKS DS1009 Standard Digital Cyclic Servo. 

Tech Note: Do not exceed 5.8V, as outlined on manufacturer specifications. Failure to follow this will result in premature failure of this servo!

DS-1009 Specifications:

• Dead band: 0.002ms (Default)
• Control System: +Pulse Width Control
• Working frequency: 120Hz
• (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8~5.8 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (4.8V): 0.125 sec/60° degrees at no load
• Operating Speed (5.8V): 0.10 sec/60° degrees at no load
• Stall Torque (4.8V): 111.79 oz/in (7.04 kg-cm)
• Stall Torque (5.8V): 138.87 oz/in (8.8 kg-cm)
• 360° Modifiable: NO
• Motor Type: DC  Motor
• Potentiometer Drive: Direct Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: metal gear
• Programmable: NO
• Connector Wire Length: 15.0 cm (5.9")
• Dimensions: 40x20x40.30mm (1.57x0.78X1.58")
• Weight: 56g (1.97 oz)

This product was added to our catalog on April 22, 2016