Team BlackSheep 5.8GHZ Unify Pro HV SE Video Transmitter (25-1000mW) (MMCX)

The Team BlackSheep 5.8GHz Unify Pro HV SE video transmitter is the big brother to the extremely popular Unify Pro HV. With the ability to be connected with up to 6S LiPo, and output 5V to power your camera. The 5V rail is filtered, providing the camera with clean and noise free power and signal. 

Weighing in at a scant 7g, and a small 31x22x6mm size, the quad will not even know it's there. Boasting power outputs from 25mW to 1W allows you to race with friends and penetrate serious concrete with just a few taps of a button. 

Pitmode - Made to Race 
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. 

SmartAudio - Full Control 
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility! 

CleanSwitch - Neighbor Friendly 
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :) 
Say no! to Dipswitches 

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

Specifications: 
Operating Voltage: 2S - 6S 
Supply Current: up to 600mA 
Operating Temperature: watch for normal airflow 
Audio Carrier Frequency: 6.5 MHz 
Video Input Impedance: 75 Ohm 
Weight: 7g 
Antenna Connector: MMCX
Video Format: NTSC/PAL 
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 30dBm (1W*)

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure. 

This product was added to our catalog on December 31, 2018