Serpent Cobra 811e-T 1/8 Electric Conversion Kit
SER600666
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Serpent Cobra 811e-T 1/8 Electric Conversion Kit. The Cobra E-buggy has proven to be one of the best e-buggies on the market. This conversion kit allows you to convert your nitro powered Cobra Truggy to clean, quiet and efficient electric power. The conversion includes all the items needed to convert the nitro truggy chassis, just add your S811-T and electronics. The chassis layout features a front mounted motor, combined with a low logtudinal mounted battery setup in the rear to deliver exceptional balance and performance, making the truck super easy to drive and jump. The E-Truggy specific body is lower, narrower, and smaller than the nitro body, and the battery-cases fit EFRA / ROAR legal 2S packs in a saddle configuration, as well as larger 4S packs. The design allows the use of any major brand buggy or truggy type BL motor.
Includes:
Includes:
- (2) 8x16x5mm Ball Bearing
- (4) Body clip mid
- (1) S811 Pivotball steering short
- (2) S811 servo spacers 1mm
- (2) S811 servo spacers 1.25mm
- (2) S811 servo spacers 1.50mm
- (2) S811 servo spacers 1.75mm
- (1) S811e-Motor-mount-RR
- (1) S811e-Motor-mount-FR
- (1) S811e-Motor-Mount-Slide
- (2) S811e-Battery-Box-Pin
- (1) S811e-Motor-screw-washer
- (1) Pivotball-double-straight-6
- (1) S811e-Pinion-18T
- (1) S811e-Diff-Cover-Center
- (1) S811e-battery-strap-left
- (1) S811e-battery-strap-right
- (1) S811e-radio-gear-housing
- (1) S811e-receiver-box-cover
- (1) S811e-servo-retainer
- (1) S811e-Servo-Lever
- (1) S811e-Steering-Balljoint
- (2) S811e-Foam-Battery-pad
- (1) S800-insert-servolever-23t
- (1) S800-insert-servolever-24t
- (1) S800-insert-servolever-25t
- (1) S811T-E-Chassis
- (1) S811T-E-Battery-Box-Left
- (1) S811T-E-Battery-Box-Right
- (1) S811T-E-Driveshaft-Cntr-RR
- (1) S811T-E-Driveshaft-Cntr-FR
- (1) S811T-Rear-Shock-Tower-2_0
- (1) S811T-E-Transmission-Brace-RR
- (1) S811e-Trans-Brace-FR
- (1) S811T-Body-Mount-Fr-2_0
- (1) S811T-Rear-Body-mount-2_0
- (1) S811T-E-Body
- (1) S811T-E body masking sheet
- (8) CS-ALLEN-M3X8
- (1) CS ALLEN M3x12
- (16) CS-ALLEN-M4X10
- (2) CS allen M2x10
- (3) CH Allen M4x10
- (4) RH-ALLEN-M3X8
- (6) RH Allen M3x14
- (4) RH-ALLEN-M3X16-FLANGED
- (4) SETSCREW-ALLEN-M3X3
- (1) setscrew Allen M4x4
- (1) Nut M3
This product was added to our catalog on October 24, 2013
Alan Davidson
Verified Owner
Monday, Jan 11 2016 (about 8 years ago)
Serpent Cobra 811e-T 1/8 Electric Conversion Kit
If you own the Nitro Truggy and want the E-Truggy and don't want to use nitro truggy anymore, save yourself a load of cash and get this conversion! - Top notch kit, build is second to none. Everything goes together very well and the balance of it is unreal.
The set up makes for such a balanced Truggy, I had the Tekin RX8 Gen 2 and 2000kv Tekin motor, now have the Castle MM2 and 1515 2200kv combo, both are very good on 4s.
I can recommend this kit all day long.
Alan (from the UK!)
The set up makes for such a balanced Truggy, I had the Tekin RX8 Gen 2 and 2000kv Tekin motor, now have the Castle MM2 and 1515 2200kv combo, both are very good on 4s.
I can recommend this kit all day long.
Alan (from the UK!)