SCRATCH & DENT: Serpent Project 4X PRO 1/10 Electric Touring Car Kit

The Serpent Project 4X PRO 1/10th scale touring car is the evolution of the 4X EVO. A part of the Project 4x series, this kit shares all features of the 4x Evo, including the same easy to install shock system and fixed-length pull-rods. The vertical top-deck has been replaced by a horizontal topdeck, giving a more aggressive steering on high grip surfaces. The rear suspension is heavily modified with much longer arms and updated geometry to create better steering and a wider set up on medium to high grip asphalt. For maximum rear stability and steering precision there is a fixed-toe rear wheel carrier included with the kit. The Project 4X Pro provides more flexibility and improved performance on any surface!

Features:

• Updated rear suspension. 
• Race proofed with multiple ETS A final results and Podium at the IFMAR World Championship.
• Fixed-toe rear for stock racing with maximum rear stability and precision, both fixed and adjustable link options included in the kit.
• Horizontal topdeck for more steering on high grip surfaces.
• Keyed topdeck for reduced risk of chassis tweak
• 2MM carbon fiber chassis with additional holes for more flex options
• Separate roll and heave motion in the car to make set-up easier and more precise
• Lightweight and compact roll dampers in front and rear require only small amounts of oil, with through rod piston systems. No membrane needed.
• Large heave damper with more oil, bigger springs and easy-bleeding system for precise rebound setting.
• All dampers include machined pistons for best possible consistency
• Anti-roll bar function integrated in roll damper/springs
• Easy and fast to change / replace the whole damper units (2 screws each)
• Pivot ball suspension with small balls for simplicity and free movement
• Motor holder with right flex
• Battery mounting system allows to re-position the battery more front or rear
• Easy diff and spool removal
• Extremely low center of gravity
• Reversed steering system for better Ackermann geometry
• Molded pull rod activated system with rockers to activate the dampers
• Same heave damper front and rear, mounted below the diff/spool above the chassis for lowest possible center of gravity.
• Durable and smooth gear differential
• One screw ride-height adjustment from chassis side
• Lightweight front aluminum spool with hardened steel outdrives, bladeless.
• DJC system in the front made of spring-steel to prevent wheel chatter and rear regular CVDs made out of 7075 T6 aluminium save weight.
• One short and one longer Kevlar reinforced drive belt and 38T pulleys on diff and front spool, 19T mid-shaft pulleys made out of hard anodized aluminum for maximum durability
• Concept and design by Serpent Designer David Ehrbar from Germany

Specifications: 
Class: 1/10th scale 190mm Electric 
Purpose: 190mm Competition touring car 
Chassis: 2mm carbon, CNC machined 
Wheel base: 254mm +/- 4mm 
Track-width front: 190mm + /- 6mm 
Track-width rear: 190mm + /- 6mm 
Weight (chassis): 550 grams 

Needed To Complete:

• 2.4GHz Radio System
• 540 Motor & ESC
• Steering Servo
• TC Tires & CA Glue 
• 190mm TC Body & Polycarbonate Paint 
• LiPo Battery
• Compatible Battery Charger