Scale By Chris Roto Can (Yellow)
The Scale By Chris Roto Can is a 3D printed miniaturized replica of the popular interlocking jug found on full size rigs around the world. This can features printed handle and lid details, with through holes in the center for mounting. These cans look great stacked or linked, in the back of a truggy, a body with a full depth bed, or even mounted up in the back of a trailer.
These are installed by using the black washer as a drill template to mark your mounting holes. Use M3 button head hardware (not included) with the included black washer. Install hardware into the washer, fit through mounting holes from the inside of the body, then screw into the can held on the outside of the body.
- White - Water
- Yellow - Diesel
- Blue - Kerosene
- Red - Gasoline
Printed at .18mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on December 6, 2017.