RaceTek RCCrazed Slim Phast 5" Complete Frame Kit

The RC Crazed Slim Phast is a purpose built racing frame. It is light, strong, and feature packed. This frame is designed around the RunCam Micro Swift FPV camera. Full-size and mini cameras will work but you won't have the same degree of protection for your FPV camera. This thing is very rigid and sports 4mm thick arms that are 12mm wide. Wide enough so that they don't turn in to rubber bands from the torque twisting produced by powerful motors and thick enough to crash and crash and keep on flying. The main plate is 3mm thick and the top plate is 2mm thick. We offer another top plate that is also 2mm thick that is a bit wider and has slots in it for mounting components and for top mounting your battery. There is a slight stretch to the frame and the MTM comes in at 210mm. We went through several prototype revisions to find the right balance of weight, strength and flight characteristics.  

Local Cleveland Quad Squad pilots really put this frame to the test and we kept refining it, a little longer here, a little wider there, a little thinner here and the result is pretty awesome! We include loads of 3d printed parts to complete the package including camera mounts, a micro swift protector, a top plate mounted camera bumper, and a rear standoff mounted VTX and RX antenna mount.  We include all these parts in green but you can add a second set of parts in other colors as well as some other cool add ons like a GoPro Session mount, arm protector paws, and a single layer stack mount that holds an XM+ and a VTX03 perfectly and many micro RXs and Micro VTXs out there!

Specifications: 

Weight: 75g with all of the included hardware and 3d parts - 69g with all of the included hardware and only camera mounts for 3d parts

Motor Size: Compatible with 22XX, 23XX motors

Flight Controller Support: 30.5x30.5mm stack size

Prop Size: 5" propellers

Frames:
3mm thick main plate

2mm thick top plate

4mm thick and 12mm wide arms

MTM distance is: 210mm

Includes:

• (1) 3mm main plate
• (5) 4mm arms (one spare included)
• (1) 2mm skinny top plate
• (4) M3x16mm steel bolts (inner most arm bolt)
• (4) M3x12mm steel bolts (outer most arm bolt)
• (4) M3x6mm steel bolts (top plate)
• (4) 20mm aluminum standoffs (inner most arm bolt)
• (4) M3 Flanged nylock nuts (outer most arm bolt)
• (4) M3 nylock nuts (inner most arm bolt between the arm and standoff)
• Camera standoff mounts
• RunCam Micro Swift protective cover for 2.1mm
• Camera guard bumper
• VTX and RX antenna mount
• Battery Strap