ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
ProTek RC
PTK-160T
This is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160T High Voltage Low Profile servo delivers an incredible 216 oz-in of torque and 0.08 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 274 oz-in and 0.06! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
- Low-Profile case saves space and weight
- Ideal for any 1/12 to 1/10 scale vehicle application
- Full aluminum case
- High voltage circuitry
- 0.08 transit speed, and 216 oz-in of torque @ 6.0V
- 0.06 transit speed, and 274 oz-in of torque @ 7.4V
- Aluminum single arm servo horn
- Full metal gears and dual ball bearings
- 160mm long 22awg connector wire w/gold plated connectors
- Coreless motor
| Servo Model
|
160T
|
| Recommended Application | 1/12 to 1/10 scale Surface
|
| Operating Voltage | 4.8V - 7.4V
|
| Operating Temperature | 14° to 140° F (-10 to +60° C) |
| Operating Speed @ 6.0V | 0.08/60° sec
|
| Operating Speed @ 7.4V
|
0.06/60° sec
|
| Dynamic Torque @ 6.0V
|
216 oz-in (15.5 kg-cm)
|
| Dynamic Torque @ 7.4V
|
274 oz-in (19.7 kg-cm)
|
| Motor Type
|
High Efficiency Coreless Motor
|
| Output Shaft | 25 Tooth
|
| Gears | Metal |
| Weight | 54.5g |
| Pulse/Frequency
|
1520μs / 333hz |
ProTek R/C is an AMain Sports & Hobbies brand.
This product was added to our catalog on December 9, 2014
Anson McKibbin
Verified Owner
Thursday, Feb 12 2015 (about 3 years ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
So I've had this servo for about a month now. Super quiet! Fast! Not to mention awesome looking! This thing works flawlessly in my Losi 22T!! Would definitely buy again and again. I own the Chad Bradley Speed servo as well and that thing is a beast in my SCTE!! These are my first Protek products. So far so good!!!
Brett Blum
Verified Owner
Tuesday, Sep 1 2015 (about 3 years ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Very good servo! I have this in my 4wd buggy and I run it on 6 volts. It has plenty of torque on high bite clay. The servo is very quiet and smooth. The case is an added bonus! I plan on running this on my nitro as a throttle servo as well on 7.4 volts. I would highly recommend this servo. I know Low profile servos of any brand have been lacking in either speed or torque in the past but this servo finally has both good specs!
Guy who spends too much......
Verified Owner
Monday, Apr 3 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
This is the most versatile servo I've used. It's size and weight make it a great choice for 2wd buggy. Then, after you use one, you'll laugh at the last sentence because this servo is crazy powerful. In my B6D, I was setting end points and checking steering linkages when I grabbed one of the tires and tried to turn it against the servo. I had to crank on the tire hard to make it 'cry'. It's strong. This is a must-have for 4wd 1/10 buggies since space is at a premium. The only servo more impressive than 160T is 170S 'Chad Bradley' edition. This servo would work for TC all the way through 4wd SC. So, great price point, great product, and tremendous versatility.
Enzo Albertoni
Verified Owner
Thursday, Oct 5 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
for the money this servo is amazing! I have used a bunch of Protek servos in the past and this one is just as good. Best budget servo out there. Just as good as the $200 servos. It's pretty cool that it's super quiet, does not make a lot of noise when trying to find center and operates extremly smooth and fast. I strongly suggest using this in any 1/10 offroad, onroad 1/10 car. I use this servo in my 2wd buggy and 4wd buggy. Great stuff Protek
l watters
Sunday, Mar 19 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
bought this servo from my local hobbytown a a few weeks ago, today i opened the box today and was pleasantly surprized. the parts bag inside had a PTK-7819-BK aluminum servo horn and PTK-3040 Aluminum Servo Mount Grommet set which is mentioned on this site, but i didn't know looking at the box or until open.
J L
Verified Owner
Sunday, Jan 29 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Superp performance! Superb quality! This servo is so smooth, so quiet, so strong and ver fast. I used these in my 10th scale wheeler in which they have always worked flawlessly, servo savers are not needed as these servos are built to truly for anyone looking for nothing short high end performance, longevity etc. Racers, bashers, rest assure this servo has you coveted. It may be a low profile servo however it has the DNA of a full sized servo. I used to use a much more exspensive brand for my low-profile servo however as good they were, they do not compare to the performance, qaulity of the protek 160T.
louis figueria
Verified Owner
Friday, Oct 30 2015 (about 2 years ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
i really like this servo, great space saver, and it takes all my abuse
Not the best driver
Verified Owner
Wednesday, Apr 4 2018 (6 months ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
So far so good. Lasted longer than other brand. It centers fast and can take a full cart wheel down the straight. Wish it came with a sticker to show them off though..
Shawn jorgenson
Verified Owner
Monday, Mar 26 2018 (7 months ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Been running it in a TLR 22 4.0 buggy at 7.4 volts. At .06 second transit speed it is more than fast enough. Plenty of torque. One of quietest and most precise servos i have ever had. Looks great with the aluminum black/silver/gold case. No problems running off Tekin rs gen 2 E.S.C and Futaba 4pv radio.
korelick
Verified Owner
Sunday, Nov 26 2017 (11 months ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Running this in my Tekno EB410. So far it has been very solid. 3 of the drivers at my local track said they broke their servos on the first day of driving the new EB410. 2 running mods and 1 running a 13.5. I bought this one hoping it would hold out, and it has performed well!
jason boyle
Friday, Aug 4 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Its nice to finally be able to buy a servo 1 time only!!! I've had this servo in my car for almost 2 years and no issues, ran this servo in an 8th buggy also and no problems. If you aren't running one you need to be!!
dujuan moore
Verified Owner
Wednesday, Aug 2 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Very consistent and reliable servo! One of the better servos I've run in a while!!
Chris Brown
Verified Owner
Friday, Jul 7 2017 (about a year ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Great servo. Installed these on my Team Associated B6 and B64. More than enough power and speed for both. No issues holding a center and couldn't be happier.
Nathan Emmett
Wednesday, Jun 8 2016 (about 2 years ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Big fan of these servos, specs like very expensive Futabas for a reasonable price. Servo is very fast, quiet, centers perfectly every time and is nice and low profile. I keep being impressed with Protek stuff from their batteries to there chargers quality products with a average price.
Joel Daigle
Verified Owner
Sunday, Apr 24 2016 (about 2 years ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
Good servos for my serpent Srx4. Good speed, good torque.
A main service is nice!!
Thanks Protek!!
A main service is nice!!
Thanks Protek!!
Dax Simonelli
Verified Owner
Thursday, Jan 25 2018 (9 months ago)
ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
I used this servo in both my 2wd buggy and 4wd. I am now using the 170S in my ST to see if the additional cool factor will shave a couple tenths. Great product and killer customer service. I had one 160T with an issue right from the box and Amain handled it perfectly as always!
