ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)

Read Reviews
Write a Review
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Price: $119.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is the ProTek R/C 150S Digital Hi-Speed Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 150S High Voltage Hi-Speed servo delivers lighting fast 0.08 transit speed and 281 oz-in of torque at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 0.06 and 346 oz-in! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, and a coreless motor.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.

Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.

 

Features:

  • Ideal for any 1/10 to 1/8 scale vehicle application
  • Full aluminum case
  • High voltage circuitry
  • 0.08 transit speed, and 281 oz-in of torque @ 6.0V
  • 0.06 transit speed, and 346 oz-in of torque @ 7.4V
  • Aluminum single arm servo horn
  • Full metal gears and dual ball bearings
  • 200mm long 22awg connector wire w/gold plated connectors
  • Coreless motor

Servo Model
150S
Recommended Application 1/10 to 1/8 scale surface
Operating Voltage 4.8V - 7.4V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V 0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
281 oz-in (20.2 kg-cm)
Dynamic Torque @ 7.4V
346 oz-in (24.9 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft 25 Tooth
Gears Metal
Weight 72.9g
Pulse/Frequency
1520μs / 333hz

ProTek R/C is an AMain Sports & Hobbies brand.

This product was added to our catalog on October 29, 2012

Paul Betz
Verified Owner
Friday, Jan 23 2015 (about 9 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Great quality servo and a decent price. I am using it as a throttle/brake servo in my Losi 8ight-T. Everyone that sees it in action are amazed at how crazy fast it is. It has been converting other brand fans into ProTek fans. I have had it for about a year and it has not suffered from the "Futaba shakes" I will be getting more for my Losi 8ight 3.0.
Anonymous
Verified Owner
Thursday, Aug 28 2014 (about 9 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
These servos are great...can not beat the quality and price point!
Anonymous
Verified Owner
Friday, Apr 19 2013 (about 10 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
A+++++++++++
Awesome servo for the price you cant really beat it, its all aluminum, faster, more torque and cheaper then other high end brands.
my only thing is i wish they would back up there product with a better warranty, this is the only problem im having.


They should back up their product like Savox does, breaks anytime anywhere, just send it in or to a local hobby shop and they will swap it out. a local racer liked them so much and wanted some but after i told him Savox has that warranty he said he would rather go with them.

Please change your policy cause i would buy these for all my cars and more people would use them.
Derik Gacom
Verified Owner
Thursday, May 25 2017 (about 6 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Got a high speed 150 and a high torque 150. Great servos for the money running one in a 4 wheel drive Losi short course truck and a Team associated Rc8b3e. I'm building a Team associated Rc8b3 nitro buggy going to put the same two servos in it. I'm going to go with a Protek nitro engine, starter box, engine heater, receiver battery, and engine heater battery. I love Protek bought a charger that works great. I will never go to another company. I order all my engines, servos, tires, wheels, parts, batteries and Protek Chargers.
chris madsen
Verified Owner
Saturday, Apr 26 2014 (about 9 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Specs looked good, price looked good, thought I'd give it a try. Holy moly!!! Never had an issue after more than a year in a heavily abused ebuggy. I'll be buying more for my nitro car. Can't go wrong with these.
Patrick McCarson
Verified Owner
Saturday, Jan 25 2014 (about 10 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
I ran this servo for the first time today. It worked flawlessly & is the fastest servo I've ever run. Just make sure to use thread lock on the screw holding down the servo arm.
chad bradley
Tuesday, Jan 15 2013 (about 11 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
The Protek 150s is the servo I feel to be the best in my 1/10 electric off road buggies and short course trucks (2wd and 4wd). the 150s has plenty of speed, torque and holding power for the large short course tires.
Paul Estrada
Verified Owner
Sunday, Apr 15 2018 (about 5 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Protek RC Servos are the only servo I will ever use, money worth and it will serve better than flashy servo out there with exaggerated price!
Rob Gordon
Verified Owner
Thursday, Mar 15 2018 (about 6 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Very very high end quality servo I’ve used KO PROPO servos for over a decade and with a little advice from my friend at Amain I got one of these 150S servos and wow what a great servo very fast with great holding power hardly any noise whatsoever if it holds up as I suspect it will then it looks like I’ll be using Protek servos from now on The next one I want to try will be for steering my 1/8 scale electric Buggy & Truggy and I’ve got my eye on the 170S Chad Bradley edition servos for those two 1/8 scales so far so good I’m very happy with these servos and Amain’s support is way beyond great there employees are always helpful and willing to go above and beyond to help there customers so I feel if they are that willing and these people know the hobby I say support the store as much as you can and buy Protek products when you can they are always great products and it supports the company and keeps those fantastic employees with a job and that’s just the right way to do it so thank you Amain and staff your great at what you do keep up the good work.
Jeremiah Sensing
Verified Owner
Monday, Sep 4 2017 (about 6 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Lasted two race days and stopped responding. Amain took it back with no questions asked but it’s disappointing to say the least. They are quiet and strong and center great and then crap out or start jittering at center out of the blue. Thumbs up to amain for standing behind them but these just don’t last unfortunately (I’ve had 3 die when I’ve got other servos older than some people at the track on a club race that are still going strong).
Francis Lacombe
Verified Owner
Monday, Sep 26 2016 (about 7 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
excellent servo super rapide et précis je le recommande rapport qualite prix
Eddie Garcia
Verified Owner
Tuesday, Oct 6 2015 (about 8 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Excellent servos, been running these since 2014 in 1/8 buggy with zero issues.
Rod Whitley
Monday, Nov 2 2015 (about 8 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Great servo for the price you cant really beat it, its all aluminum so you don't have worry about the case breaking its faster and good torque.
jeremy franklin
Friday, Oct 23 2015 (about 8 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Have this servo in my nitro buggy and it handles like a dream. It took me a little while to get use to the speed of this servo. this is a very nice servo for the price.
Vyacheslav Sudolskiy
Verified Owner
Sunday, Apr 5 2015 (about 8 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Got slackness and shaky disease only for 4 months of 1/8 racing. It should cost half of current price
Rui Almeida
Verified Owner
Sunday, Apr 13 2014 (about 9 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Best servo for the money. Bought 2 of them for my nitro buggy, this are my first "affordable" servos, always owned brand name servos, I have been a Futaba HV servos follower for a long time, and orion servos for my 1/10 cars, this servos are just as smooth as the futabas, but affordable.
esteban ronquillo
Verified Owner
Tuesday, Jan 21 2014 (about 10 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
I put this bad boy in my 22 and the performance has been nothing short of AWESOME...the only drawback, is now I need to fork over the cash and get one for my B44!
Anonymous
Verified Owner
Friday, Apr 12 2013 (about 10 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
This is the only servo I will ever buy. I have this servo in my Mugen 1/8 buggy ECO. It's super fast and has plenty of power. I'm not sure you even need the high torgue 150S. I'm most likely going to put two of these in my MBX7. I have the Hitec titianinum gear servo and it's very noisy. This servo looks awesome and comes with an aluminium arm....you can't beat it!
Dylan Rodriguez
Monday, Feb 4 2013 (about 11 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
Very fast and powerful servos, we use these for our throttle/brake in our buggy and truggy
jose perez
Verified Owner
Monday, Apr 24 2017 (about 6 years ago)
ProTek RC 150S Digital High Speed Metal Gear Servo (High Voltage/Metal Case)
I had 2 servo 150t without problems for almost 2 years and now I buy a 150s that I failed 2 races, this one is locked and does not respond. disappointed me