Parma PSE Faskolor Liquid Body Paint Mask (8oz)
This is an eight ounce bottle of Parma PSE Faskolor Liquid Mask. This easy to use liquid mask allows painters to create custom designs easier, without the use of masking tape. It works great for painting lexan RC bodies, but can also be used to paint helicopter canopies, models, helmets or anything else you want to unleash your artistic creativity on! It dries clear so you can draw your design on the outside of the body and can still see your design allowing you to cut out the FASMASK on the inside. The average RC body requires 2-3 ounces.
Use a 1/2" wide paint brush or airbrush with large tip to apply a thick even coat. Allow it to dry or use a blow dryer to speed up dry time and repeat for a nice "skin", thick enough that it will allow you to cut through with a hobby knife and peel away the sections you want to paint. You can also use a smaller brush to mask off small, specific areas such as windows, bumpers and graphics.
NOTE: When using a hobby knife, cut lightly so you do not cut deep enough to cut the body!
This product is expected to arrive on Tuesday, November 15 2016.