ParkZone F4U-1A Corsair Plug-N-Play Electric Airplane
PKZ6075
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the ParkZone F4U-1A Corsair Plug-N-Play Electric Airplane. Few World War II fighters inspired awe in both friend and foe like the F4U-1A Corsair. Capable of speeds in excess of 400 mph, it left a ghostly howl in its wake that earned it the name "Whistling Death" among enemy troops. For those under its protection, however, there was no sweeter sound on earth.
The ParkZone F4U-1A Corsair is a remarkably scale tribute to this warbird icon that's a blast to fly. Most of its details, including the paint scheme, are already applied for you. A set of bolt-on drop tanks and two sets of decals are included. In the air, its potent 15-size, 950Kv brushless motor will deliver all the power you need for high-speed strafing runs and spirited sport aerobatics.
For a truly spectacular Corsair experience, add the optional flaps and E-flite® electric retracts.* The model has been designed to make installing these options quick and easy, and its Spektrum™ AR600 receiver has all the channels you’ll need.
*Requires two ParkZone SV80 Servos (PKZ1081) and E-flite 10- to 15-size 90-Deg Rotating Electric Retracts (EFLG120), all sold separately.
Features:
Wingspan: 44.0 in (1120mm)
Overall Length: 36.0 in (915mm)
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts, and flaps installed
Motor Size: 15-size 950Kv Brushless Outrunner (installed)
Radio: 4+ channel minimum radio system required (6+ for flaps and retracts)
Prop Size: 9.5 x 7.5
Speed Control: 30-Amp Pro Switch-Mode BEC Brushless ESC (installed)
Recommended Battery: 11.1V 3S 2200mAh 25C LiPo
Flaps: Optional
Retracts: Optional
Control Throw (Ailerons): Low: 13mm; High: 18mm
Control Throw (Elevator): Low: 16mm; High: 20mm
Control Throw (Rudder): Low: 20mm; High: 27mm
Control Throw (Flaps): Half: 10mm; Full: 20mm
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes
The ParkZone F4U-1A Corsair is a remarkably scale tribute to this warbird icon that's a blast to fly. Most of its details, including the paint scheme, are already applied for you. A set of bolt-on drop tanks and two sets of decals are included. In the air, its potent 15-size, 950Kv brushless motor will deliver all the power you need for high-speed strafing runs and spirited sport aerobatics.
For a truly spectacular Corsair experience, add the optional flaps and E-flite® electric retracts.* The model has been designed to make installing these options quick and easy, and its Spektrum™ AR600 receiver has all the channels you’ll need.
*Requires two ParkZone SV80 Servos (PKZ1081) and E-flite 10- to 15-size 90-Deg Rotating Electric Retracts (EFLG120), all sold separately.
Features:
- 4-channel control – throttle, elevator, aileron and rudder
- Powerful 15- sized 950Kv BL outrunner, installed
- E-flite® 30A Pro Switch-Mode BEC brushless ESC, installed
- Servos, installed
- Designed to accept E-flite 10- to 15-size 90-Deg Rotating Electric Retracts (EFLG120), sold separately
- Molded servo pockets for optional flaps
- Durable Z-Foam™ construction
- Engine, radiator, exhaust, gun and cockpit details
- Authentic U.S. Navy trim scheme
- Includes bolt-on drop tanks
- Includes decal sets for Corsairs flown by Ira Kepford and Tommy Blackburn
- Includes hardware for optional flaps
Wingspan: 44.0 in (1120mm)
Overall Length: 36.0 in (915mm)
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts, and flaps installed
Motor Size: 15-size 950Kv Brushless Outrunner (installed)
Radio: 4+ channel minimum radio system required (6+ for flaps and retracts)
Prop Size: 9.5 x 7.5
Speed Control: 30-Amp Pro Switch-Mode BEC Brushless ESC (installed)
Recommended Battery: 11.1V 3S 2200mAh 25C LiPo
Flaps: Optional
Retracts: Optional
Control Throw (Ailerons): Low: 13mm; High: 18mm
Control Throw (Elevator): Low: 16mm; High: 20mm
Control Throw (Rudder): Low: 20mm; High: 27mm
Control Throw (Flaps): Half: 10mm; Full: 20mm
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes
Needed To Complete:
- 4+ channel Transmitter and Receiver radio system (6 channels needed for flap retract operation)
- Flight Battery
- Charger compatible with flight battery
- For Optional Flaps
- (2) SV80 servos (PKZ1081) are required
- For Optional Retracts
- 10-15 size 90-degree rotating main electric retracts (EFLG120)
This product was added to our catalog on September 25, 2012