OXY Heli Oxy 3 "Stretch" Flybarless Electric Helicopter Kit w/Zeal 285mm CF Blades

This is the OXY Heli Oxy 3 Flybarless Electric Helicopter Kit, with an included Lynx Heli Stretch Kit and 285mm ZEAL Carbon Blades.

OXY Heli's Oxy 3 Flybarless Electric Helicopter Kit is the first helicopter in the Oxy Helicopter line. Developed by Lynx Heli engineers and designers, the Oxy 3 is a 250 electric flybarless machine that delivers performance qualities to suit both 3D and sport pilots alike.

With a simple, robust and lightweight design, the Oxy 3 flies like a much larger heli. Using micro size servos, a belt driven tail rotor, flybarless head and transmission that can handle RPM's up to 4500, the Oxy 3 can be setup mild or wild. The choice is yours. Plus, the 75mm battery tray can fit batteries from 3S to 6S, and an optional stretch kit will be available soon to accommodate 280mm blades (included in this kit). Additionally, specialty upgrades will be available to allow the use of either 3 or 4 blade heads, with a full length fuselage to customize the look of the machine.

Stretch Features:

• Incredible larger feeling, increased visibility and flight precision
• 25mm longer tail boom for increased tail authority
• Optimized lightweight design
• Lower head speed results in more stability and more visibility, perfect for practice and beginners
  
• Higher head speed creates excellent agility and pops and super stable in the high speed flight
  
• Design assisted by FEA (Finite Element Analysis) to achieve light weight and maximum strength

OXY 3 Features:

• Heli designed for intense 3D performance:
• Ultra rigid frame
• Triple main shaft supports
• Quality injection molded plastics
• Lightweight, high visibility and high-end airbrush canopy from Canomod
• Autorotation integrated into main gear hub
• Main rotor:
• Semi rigid DFC head for precise performance
• Thrust bearings in main and tail grips
• Oversize hardened spindle
• Ball raced 120° CCPM serviceable swash plate
• Swashplate linkages optimized geometry
• Tail system:
• Belt drive tail (low parts count and low crash cost)
• Innovative delta box tail boom with no requirement for boom supports
• Tail optimized to minimize vibration and servo load at high tail speed
• CNC tail pulley with pretension pulley system
• Rigid carbon fiber 3mm diameter tail push rod for the increased tail control
• Electronics & Power system:
• Battery tray fits a variety of battery packs 3s -4s (1300 to 1600 mAh) , 6s  (800 to 950 mAh) –  max length 75mm
• ESC support suitable for 25 – 40A ESC and more
• Kit Motor: EOX 2214 – Black Edition – 4100KV – 3.17mm Shaft – suitable for 3s and 4s battery packs
• Hardened Steel Pinion included in the kit: 11T suitable for 4s – 4100 kV motors and 14T suitable for 3s – 4100 kV motors(optional pinions: 12-13-15)
• Suitable for most micro cyclic and tail servos
• Smart and clean electronic wiring set up

Specifications:
Length: 530mm (555mm w/stretch) Height: 175mm Width: 80mm
Main rotor blade length: 255mm (285mm w/stretch)
Tail blade length: 47mm and 50mm in std kit for different tail authority needs (suggested 47mm for Hard 3D Set-Up)
Slant main gear: 140T 0.5 Mod
Wide head speed range: 3000 for sport flying a to 4500 for insane 3D
Tail gear ratio: 4.214 (14T pulley) for 3800 – 4500rpm
Approximate RTF weight: 580g with 3S 1300mAh battery– suitable for 3.5 minutes of intense 3D at 4000rpm

Includes:

• (1) Oxy 3 Kit
• (1) Oxy 3 Canopy
• (1) ZEAL CF Main Blade Set 285mm
• (1) Plastic Tail Blade Set
  

Needed To Complete:

• 6-Channel Helicopter Transmitter System
• (3) Micro cyclic servos
• (1) Micro tail servo
  
• (1) Flybarless System
  
• (1) 2214-4100kV Motor
  
• (1) 40A Helicopter ESC
• (1) 3S -4S (1300 to 1600mAh), or 6S (800 to 950mAh) LiPo Battery – max length 75mm
• Compatible Battery Charger

Note: Canopy pictured may be different than the included canopy supplied with this model.

This product was added to our catalog on November 3, 2015