Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Overview:
The Kyosho Fazer Mk2 FZ02L 2006 Subaru Impreza was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the Fazer series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source.
Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allow drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter.
Features:
- Officially licensed by Subaru to Kyosho
- Based on the GDB type Impreza nicknamed Hawkeye.
- Pre-painted finished body with Kyosho's original coloring with beautiful gradation and flashy colors that are conscious of the drift scene.
- On the side of the body, the number 60 is placed to commemorate the 60th anniversary of Kyosho.
- Factory-assembled Readyset package only requires (AA) alkaline batteries for the transmitter and battery with charger for the chassis!
- In the initial setting, the vehicle height is raised so that troubles due to gaps can be avoided.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Shaft drive full-time 4WD touring chassis.
- Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.
- Uses Hex head button or countersunk screws within each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.
- Motor mount with holes to accommodate 29T to 37T pinion gear.
- Performance can be further enhanced by installing various optional parts.
- Chassis realizes a low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes the torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without an upper deck.
- Reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.
- Handling factors such as bump steer and scrub radius are optimized on the front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.
- Resin drift tires that have both control performance and slide performance are equipped with 5-spoke racing wheels with deep rims that are conscious of the drift scene.
Specifications:
- Scale: 1/10
- Drivetrain: 4WD Shaft driven
- Length: 456mm
- Width: 205mm
- Height: 140mm
- Wheelbase: 260mm
- Tread (F/R): 174mm
- Tires (F/R): 63.2×24.2mm
- Gear Ratio: 6.54:1
- Weight: 1650g (approx.)
- Motor: G14L
Includes:
- (1) Kyosho Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Electric Touring Car
- (1) Syncro KT-231P+ transmitter and receiver
- (1) Hexagonal wrench
- (1) Spanner
- (1) Drift wheels set
Needed to Complete:
- (1) 2S (7.4V) LiPo Battery with T-Style connector
- (1) Compatible Charger
- (4) (AA) Batteries
This product was added to our catalog on October 6, 2023
