Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)

Read Reviews
Write a Review
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
In Stock Online
Usually ships in 24 hours
FREE Shipping Eligible! Learn More
Price: $159.99
This item earns up to 160 VIP Reward Points Learn More

This is a Junsi Electronics iCharger 306B+ DC Battery Charger.This charger allows you to charge and balance 2S to 6S lithium batteries. The charger comes with XH style balance connectors on the side of the charger that fit Align, E-Flite and ProTek R/C battery packs. Adapter boards for other batteries are also available.

  • High power, high current, high-performance power conversion circuit. The iCharger series uses advanced Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This not only saves power and reduces heat build up but also makes the charger more compact and conveniently mobile.
  • Two input power choices. DC jack with auto-resetting fuse and alligator clips that can be soldered to the main input leads.The output power can be adjusted to align with the available input power, thus preventing input current overload and protecting the DC source.
  • Multiple Battery Types. The iCharger series can be used with three types of Lithium batteries - LiPo, Lilo, LiFe - and has a fully integrated cell balancer.
  • Temperature Sensor. Internal temperature sensor and temperature controlled automatic cooling FAN controls the internal temperature and provides intelligent protection. When the internal temperature is over 60℃(140 oF), the output power is automatically reduced by 25%. If the temperature exceeds 65℃(149 oF) the charge cycle is stopped.
  • 10 memory slots. Convenient set of 10 battery profile memories that can be saved and loaded by number. You can also set the name on the memory slots to a custom value for easy identification.
  • Large backlit LCD screen. 2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total charge (mAh), charging time and temperature etc.
  • Charge/Discharge options. Various charging/discharging settings and cycles to meet a wide range of customer needs. For Lithium batteries: balance charging, normal charging, fast charging, storage, discharging, ext-discharging, charge/discharge cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto, charging-manual, discharging, charge/discharge cycling and forming charge. For Pb batteries: charging and discharging.
  • Unique Lithium battery expanding discharge program. When you connect the external capacity resistance, you can use it as the maximum discharge power capacity—1200W (@40V/30A).
  • Unique Lithium battery Monitor program. When you use other equipment to charge or discharge a Lithium pack, you can use the iCharger to monitor the per-cell voltages, battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long, the iCharger will generate an alarm sound and the related information will blink.
  • Battery internal resistance measurement. The iCharger can not only measure the internal resistance of the battery pack, and also can measure the per-cell internal resistance (only available for lithium battery).
  • Perfect protection. The iCharger has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and time overrun.

The iCharger also supports the “Open Format” data of the “logview” software and can display, plot and analyze the charge and discharge data (See detailed information about logview in the following website, http://www.logview.info). To download the product manual click here.

NOTE: This charger requires a 12V-38V power source.

Input Voltage Range: 4.5 – 38.0VDC
Charge Current Range: 0.05 – 30.0A
Discharge Current Range: 0.05 – 30.0A
Maximum Charge Power Capacity: 1000W @ Input voltage > 23V
Internal Discharge Power Capacity: 80W maximum internal
External Discharge Power Capacity: 1200W @ 40V/30A
Current Drain For Balancing: <500mA
Balance Accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) Battery Cell Count: 1 – 6 Series (In non-balance mode, expand LiFe to 12s)
NiCd/NiMH Battery Cell Count: 1 – 25 series
Pb Battery Cell Count: 1 – 18 series (2 –36V)
Battery Setup Memories: 10
Intelligent Temperature Control: Yes
PC Connect: USB port
Weight: 750g
Dimensions (L X W X D): 143 x 123 x 46mm (5.63" x 4.84" x 1.81")

WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.

This product was added to our catalog on January 14, 2011

Verified Owner
Wednesday, May 11 2011 (about 11 years ago)
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
Excellent charger..i try different chargers but this is one of the most powerful.
Verified Owner
Saturday, Jan 30 2016 (about 6 years ago)
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
Now this is a charger, yes sir. I calibrated this with a multimeter, set it to slow balance mode, and use a 1200 watt 24V power supply on its own dedicated outlet. I recommend to the same to get the full effect from this amazing charger. I charge (8) 22.2volt 3300 batteries on daisy chained parallel boards. The batteries measure out exactly 4.20 per cell. The batteries will not drop voltage as soon as they come off the charger- they are truly leveled off at the voltage. I charge them with 23A and am blown away to see the charger inputting 24A to do it. Do not crank on this charger with less than 24V input or an overloaded circuit. Other than that, I'm sure this thing will last a long time. It's super efficient and the wires and unit do not even get warm. I would charge at the full 30A but notice the batteries are better balanced and accurate with a more conservative charge rate.
Saturday, Feb 5 2022 (6 months ago)
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
I've been using this charger for 7 years now to charge RC Aircraft and Car batteries. It's been fantastic and I would happily replace it with another the same if it ever died on me.
Verified Owner
Thursday, Feb 4 2021 (about a year ago)
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
Sweet must have,very powerful does all you need in a lipo charger
Wednesday, Feb 15 2017 (about 5 years ago)
Junsi iCharger 306B Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/30A/1000W)
This charger is by far the best in it's class. I acquired mine from a friend who took very good care of it. Going on three years old and is flawless and very accurate. Currently paired up with an 875 watt HP power supply. If this thing ever does croak I'll buy another.