Incision Series 1 Light Kit
INCIRC00450
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The Incision Series 1 Light Kit is a high power LED kit that is ready to be installed in your VS410 Origin and Origin Halfcab bodies, as well as other bodies that accept "Q" style light buckets. The light buckets feature a heatsink on the back side to dissipate heat and provide a long life. These LED's are 3S ready and will light up the trail on night crawls.
Features:
Features:
- Molded front light buckets with high powered white LED
- 5mm Red LED tail lights
- LED light controller
- Manual on / off function
- Additional on / off control from aux receiver channel
- Headlights powered by 2-3S lipo balance plug on light controller
- Aux control and red LED tail lights powered by RX plug
Includes:
- (2) Front led headlight housings with heat sink
- (2) 5mm red LED tail lights
- (1) LED controller with required power plugs
Installation Instructions for VS4-10:
- Remove stock light buckets from VS4-10 grill. Mount included light assembly to the body with the existing 1-64 hardware. Red LED tail lights mount into stock VS4-10 rear LED housings.
- Connect LED plugs to the Light Controller. Connect Light Controller to 2s or 3s Lipo battery for headlight power source. Connect Light Controller to receiver to power red LED’s, for full functionality use an open auxiliary channel in receiver. Program auxiliary channel on transmitter for 2 positions (On/Off) with endpoints set to max for each position.
- The 3-position switch located on the LED light controller selects mode (Off / Aux CH on/off control / ON). To control LED function through the transmitter ensure the 3 position switch on LED light controller is in the middle position.
*Note: Recommended assembly: Attached LED controller and route all LED light wires to underside of body. Use Balance plug and JST connection for power source and RX connection at chassis for easily removal.
This product was added to our catalog on September 8, 2021
Brandon Arnett
Verified Owner
Wednesday, Nov 2 2022 (about a year ago)
Incision Series 1 Light Kit
These headlights are insanely bright; they are brighter than the dual front lightbars on my Losi Baja Ray SBR 2.0.
Before turning them on I thought the heatsinks were overkill, but they are necessary for prolonged use. You can also dim them, but when doing so it shuts off the taillights which is a bit of a letdown. If you want to drive at night in comfort, these will satisfy. If you just want lights for flair, these are overkill due to the brightness.
I have these installed on a MST Pandem E30 Rocket Bunny Drift Body for my TT-02 chassis. These lights fill out the front pods on the E30 perfectly.
Before turning them on I thought the heatsinks were overkill, but they are necessary for prolonged use. You can also dim them, but when doing so it shuts off the taillights which is a bit of a letdown. If you want to drive at night in comfort, these will satisfy. If you just want lights for flair, these are overkill due to the brightness.
I have these installed on a MST Pandem E30 Rocket Bunny Drift Body for my TT-02 chassis. These lights fill out the front pods on the E30 perfectly.
Anthony Woodruff
Verified Owner
Tuesday, Nov 9 2021 (about 2 years ago)
Incision Series 1 Light Kit
Great lights! They are bright and easy to install, the controller allows you to turn them off/on with a channel on your receiver but it defaults to on if the car is off.