Hobbywing Xerun SCT Pro Sensored Brushless ESC/Motor Combo (4000kV) w/Program Box

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Low Price: $178.99
Discontinued Online

This is the Hobbywing Xerun SCT Pro Sensored Brushless ESC and 4000kV 4-Pole Motor Combo, with an included LCD Program Box. The included 4-Pole 4,000kV motor is 2-3S LiPo capable and is intended for 1/10 4WD Short Course Applications. The motor provides large output power and high efficiency, and features both sensored and brushless technology to get the job done. The SCT Pro ESC is 2-4S LiPo capable and also features brushless and sensored technology, but can be used for either 1/10 or 1/8 applications.  

NOTE: This motor features a 5mm motor shaft. 

ESC Features: 

  • Sensored ESC and sensored motor have the best control feeling.
  • The switch mode BEC has powerful output to supply all electronic equipments.
  • Excellent start-up, acceleration and linearity features.
  • The major electronic components are sealed against splashing water or dust.
  • Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
  • Electric brake function, also compatible with mechanical disc-brake system.
  • Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
  • Internal timing can be changed easily to make the ESC suitable for various of motors.
  • Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
  • ESC firmware can be updated through the USB adapter in the LCD Program Box.
  • These is a mounting stand for installing the ESC on chassis easily and firmly.

Motor Features:

  • Sensor motor has the best control feeling and best performance.
  • XERUN-3656SD has 4 poles rotor, it has bigger torque, higher efficiency and larger power, best for 1/10 scale 4WD SCT.
  • Top quality materials:
    • Aluminum shell (case)
    • High quality magnets       
    • Copper wires of high temperature endurance       
    • Good quality bearings
  • Dust-proof.
  • The "U" shape connectors are easily for soldering.

ESC Specifications:
Continuous 120A, burst  760A;
Input: 6-12 cells NiMH/NiCd or 2-4S Lipo;
BEC: 6V/3A (Switching mode);
Resistance: 0.0004 Ohm;
Motor Supported: Sensored and sensorless brushless motor
Suitable Motor:

  • With 6 cells NiMH/NiCd or 2S Lipo:   KV≤6000;
  • With 7-9 cells NiMH/NiCd or 3S Lipo:  KV≤4000;
  • With 10-12 cells NiMH/NiCd or 4S Lipo:  KV≤3000;

Suitable Car: 1/10 and 1/8 scale short course truck / buggy / truggy
Cooling fan: 5-6V;  * Note #1
Size: 53.5mm(L) * 36mm(W) * 36mm(H).
Weight: 99g;
* Note #1: The cooling fan is powered by the built-in BEC of 6V.

Motor Specifications:
Motor Diameter: 36mm
Motor Length: 56mm
Shaft Diameter: 5mm
Shaft Length: 18.1mm
Rotor Poles: 4
Volts: 2-3 LiPo
Weight: 220g

LCD Program Box Specifications:
90mm (L) * 51mm (W) * 17mm (H)
Input Voltage:
4.5-12.6V (If the ESC hasnít a built-in BEC, you must use an additional battery pack to supply the program box)
16x2 characters LCD.
Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)

This product was added to our catalog on July 29, 2014.

Patrick Samson
Monday, May 4 2015 (about 3 years ago)
Hobbywing Xerun SCT Pro Sensored Brushless ESC/Motor Combo (4000kV)
(I got this exact combo through a different vendor) I've run this in my Tekno SCT410 since I got the kit a few months after its initial release. I was worried at first when I got it because this is about half the cost of the Tekin combo many other SCT410 users have so I expected about half the performance. As I found out, sometimes you just pay more for the name, this combo is amazing. The SCT410 flies around the track with this and is very closely matched in speed and agility to the other two 410 racers at my local track that use Tekin RX8/HD power. The BEC doesn't have a 7.4v mode but that's okay, it's got good capacity. Like the other users here I found it helpful to reduce the LVC to 3.0v for this truck, it's likely because it will trip over any voltage drop and the Tekno is pretty hefty and demanding when moving.)
Eric Dixon
Verified Owner
Wednesday, Jan 28 2015 (about 3 years ago)
Hobbywing Xerun SCT Pro Sensored Brushless ESC/Motor Combo (4000kV)
Purchased this combo to run in a Tekno SCT410. Was a little skeptical of the price, as you get what you pay for. Plenty of power/torque with smooth delivery. Noticed that I was going through battery packs quicker than average. Dropped the LVC down to 3.0 vs the 3.2 that is recommended with the included programmer. This seemed to correct my issue. So far solid, I would recommend this combo.)
Rob Sannes
Verified Owner
Saturday, Feb 14 2015 (about 3 years ago)
Hobbywing Xerun SCT Pro Sensored Brushless ESC/Motor Combo (4000kV)
I also run this system in a Tekno sct410 and have found it to be the most economical choice for me. The power is superb and so far durability has been perfect. Runs cool and reliable I will second the low voltage cut off is better set at 3.0 volts to get proper battery life. The price is so good I bought a 4700 kv system for larger tracks. That's 2 systems for just a few dollars more than one of the other big name choices. Going to try a 1/8 scale system in EB48.2 soon)