Hobbywing Xerun 150A Sensored 1/8 Buggy Brushless ESC/Motor Combo w/Program Box

This is the Xerun 150A Sensored 1/8 Scale Buggy Brushless ESC and Motor Combo, with an included LCD Program Box. This combo combines the 150A Xerun Sensored/Brushless ESC with the Xerun 4274 1800kV Sensored/Brushless motor, and also adds in the Hobbywing LCD Multifunction Program Box. This motor and ESC combo works great with 1/8 scale on-road vehicles as well as 1/8 scale off-road buggies, truggies and short course trucks.

ESC Features: 

• Compatible with most of sensorless and sensored brushless motors such as Novak, LRP and Feigao, etc.
• Large current endurance.
• Excellent start-up, acceleration and linearity features.
• The built-in switching mode BEC has powerful output to supply all electronic equipments.
• Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
• Electric brake function, also compatible with mechanical disc-brake system.
• Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
• Internal timing can be changed easily to make the ESC suitable for various of motors.
• Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
• ESC firmware can be updated through the USB adapter in the LCD Program Box.
• The major electronic components are sealed against splashing water and dust.
• These is a mounting stand for installing the ESC on chassis easily and firmly.

Motor Features:

• Sensored motor provides the best control and performance
  
• 4-poles rotor, high efficiency (>90%), the additional heat-sink is unnecessary in most applications.
• Updated design with lighter weight but bigger torque.
• Higher power, faster acceleration and higher top speed.
• Top quality materials:
• Aluminum shell (case)
• High quality magnets       
• Copper wires of high temperature endurance       
• Good quality bearings
• Anti-broken rotor with special workmanship.

ESC Specifications:
Output: Continuous 150A, burst 950A.
Input: 6-18 cells NiMH/NiCd or 2-6S LiPo. (When using 2S lipo or 6 cells NiMH, an UBEC or seperate battery  is strongly recommended to supply the receiver)
BEC: 5.75V/3A (Switch mode built-in BEC).
Resistance: 0.0002 Ohm.
Motor Supported: Sensorless and sensored brushless motors.
Suitable Motor:

• When working with 4 cells Lipo: KV<=3000
• When working with 6 cells Lipo: KV<=2400

Suitable Car: 1/8 On-road/Buggy/Truggy/Monster competition.
Size: 58mm(L) * 46.5mm(W) * 35mm(H).
Weight: 105g (Without wires).

Motor Specifications:
kV: 1800
Motor Diameter: 42mm
Motor Length: 74mm
Shaft Diameter: 5mm
Shaft Length: 18.5mm
Resistance mΩ: 5.3
Weight: 371g
Io: 2.3A@10V
Max Input: 26V
Power: 1300W

Program Box Specifications:
Dimensions: 90x51x17mm
Weight: 65g
Input Voltage: 4.5-12.6V
Display: 16x2 character LCD
Interface: Mini USB, ESC interface (Futaba plug), Power supply interface (Futaba plug)

This product was added to our catalog on July 29, 2014