Hitec Eclipse 7 Pro 2.4GHZ Transmitter w/Optima 7 Receiver & 4 HS-5485HB Servos

This is the Hitec Eclipse 7 Pro 2.4GHz Transmitter with an included Optima 7 Receiver and four HS-5485HB servos. Hitec gave the Eclipse 7 a face lift with numerous upgrades to create the highly anticipated Eclipse 7 Pro. Offering a high intensity white backlit LCD screen, ergonomically positioned, back mounted slider knob and ultra-smooth quad ball bearing gimbals, this advanced AFHSS 2.4GHz system is your next feature-packed radio! It possesses 16-model maximum storage, intuitive control switches and an array of telemetric functions including sensor monitoring and on-board receiver low battery warning. It doesn’t stop there! The Eclipse 7 Pro provides specific programming for fixed wing, glow, gas or electric planes, helicopters and sailplanes! Let it make you a Pro!

The HS-5485HB is Hitec’s lowest price digital servo and is an excellent choice for sport airplanes up to .60 size. Featuring a programmable digital circuit and Hitec's Karbonite™ gear technology that offers four times the strength as standard nylon gears and after hundreds of thousands of cycles won’t show any signs of wear. 

Features:

• 7-Channel 2.4GHz Telemetric System
• 3-Model Type (ACRO/GLID/HELI) Programming
• 16-Model Memory
• Ultra Smooth and Precise Quad Ball-Bearing Gimbals
• Easy-to-Read Backlit LCD Screen
• Back Mounted Sliders for Easy Access
• Range Check Mode
• Auto-Assignable Control Switch
• Telemetry Monitoring (HTS-SS Nitro or HTS-SS Blue)
• Built-in Battery Telemetry with User Adjustable Low Battery Warning
• Selectable Stick Mode
• Digital Trims
• 7-Character Model Naming
• Three Flight Conditions
• Model Copy
• Sub Trims
• Two Flight Timers with Throttle Activation on Primary
• EPA
• 5 Programmable Mixes
• All Channel Servo Reverse
• Dual Rates on Channel 1, 2 and 4
• Exponential Rates on Channels 1, 2 and 4
• Data Reset to Defaults
• Throttle Cut Switch
• Throttle Lock
• Trainer
• Advanced ACRO Programming
• Landing Mix
• Flap Trim Adjust

Advanced Features:

• ACRO Programming:
• Landing Mix
• Flap Trim Adjust
• Elevator-to-Flap Mix
• Flap-to-Elevator Mix
• Elevon Mix
• V-Tail Mix
• Ailevator Mix
• Flaperon Mix
• Aileron Differential
• Snap-Roll
• HELI Programming:
• Throttle Cut
• Rudder-to-Throttle Mix
• 2 Idle-up, 1 Throttle Hold
• 5-Point Throttle Curve
• 5-Point Pitch Curve
• Gyro Gain Adjust
• Revolution Mix
• Hovering Pitch Knob
• Hovering Throttle Knob
• Engine Lock Switch
• 4 Swash Types:90° Type, 120° Type, 140° Type, 180° Type
• GLIDER Programming:
• 2 Servo Wing Mode
• Camber Mix
• Aileron Differential
• V-Tail Mix
• Elevator-to-Flap Mix
• Aileron-to-Rudder Mix
• Flap-to-Aileron Coupling
• Flap-to-Elevator Coupling
• Flap-to-Aileron Trim
• Servo Wing Mode – Same as Above Plus:
• Crow Mix
• Aileron-to-Dual Flap Trim
• Aileron-to-Dual Coupling
• Dual Flap-to-Aileron Trim
• Aileron-to-Flap Coupling

Servo Applications: Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface.

Servo Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.

Servo Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
 
Servo Specifications:
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.20 / 0.17
Torque oz./in. (4.8V/6.0V): 72 / 89
Torque kg./cm. (4.8V/6.0V): 5.2 / 6.4
Size: 1.57x0.78x1.49" (39.88 x 19.81 x 37.85)
Weight ounces: 1.59
Weight grams: 45.08

Includes:

• Transmitter
• Optima 7 Receiver
• (4) HS-5485HB Digital Servos
• Rechargeable Transmitter & Receiver Batteries
• AC Charger

This product was added to our catalog on March 14, 2012