Hangar 9 Pawnee Brave 20cc ARF Airplane Kit (Electric/Nitro/Gas) (2032mm)

Hangar 9 Pawnee Brave - Electric, Gas, or Nitro RC Airplane

The Hangar 9 Pawnee Brave 20cc ARF Airplane Kit is designed after the Piper PA-36 Pawnee Brave. The full size version of this plane was first announced in 1973 and featured many advancements to make it a remarkable agricultural plane. Hangar 9 has faithfully scaled this plane down into a great sport/scale flying airplane. Performance and flying characteristics depending on your choice of power plant. This plane can be built using an electric motor, gas engine, or nitro engine (each sold separately). Take to the skies with the Hangar 9 Pawnee Brave.

This Pawnee Brave features an 80" wingspan with a two-piece wing for ease of transportation. Adding to the scale detail, the plane includes LED landing lights, flaps, tundra style wheels and tires, and more! The Hangar 9 Pawnee Brave 20cc ARF can take you from crop dusting all the way to aerobatic flying all in one performance-minded aircraft.

NOTE: Finished plane shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

• Expertly constructed with laser-cut balsa and plywood
• Two-piece, plug-in wing makes field assembly fast
• Functional flaps add realism and give a wider flight envelope
• Large top-hatch provides easy access to electronics and flight batteries
• Easy to maintain, genuine Hangar 9® UltraCote® film covering

Specifications:

• Wingspan: 80" (2032 mm)
• Length: 59.06" (1500 mm)
• Weight:
• Gas/Nitro: 194.4oz (5513g)
• Electric: 166.7oz (4725g) Without Battery
• Material: Wood
• Spinner Size: 2.28" (58 mm)
• Center of Gravity (CG): 5-1/8" (130mm) from Leading Edge
• Approximate Assembly Time: 15-20 Hours
• Completion Level: Almost Ready-To-Fly

TECH NOTE: Almost Ready to Fly aircraft come with all hardware needed to build an airframe. Once assembled, you will need a compatible motor, ESC, battery, servos, transmitter, and compatible receiver. Please check the needed to complete to make sure you have everything you need to get up into the air!

Includes:

• (1) Hangar 9 PA-36 Brave 20cc ARF
• (1) Product Manual

Needed to Complete:

• (1) Transmitter and Compatible Receiver (8CH Minimum)
• Servo Extensions:
• (3) 3-inch
• (5) 6-inch
• (1) 12-inch
• (2) 18-inch
• Misc. Tools for Completion
• Gas/Nitro Setup:
• (7) High Voltage Servos
• (1) 2S Receiver Pack
• Compatible Charger
• (1) 20CC Gas RC Airplane Engine or (1) 0.90-1.20 Size Glow Engine
• 2' Fuel Line
• (1) 17x6 Propeller
• Electric Setup:
• (6) High Voltage Servos
• (1) 5065-450Kv Outrunner Brushless Motor (SPMXAM4770)
• (1) 100 Amp Brushless ESC (SPMXAE1100)
• (1) 6S 5000mAh LiPo Battery (SPMX56S50
• Compatible LiPo Charger
• (1) 17x7 Electric Propeller

This product was added to our catalog on February 14, 2023