E-flite Power 160 Brushless Outrunner Motor w/4mm Bullets (245Kv)

Read Reviews
Write a Review
E-flite Power 160 Brushless Outrunner Motor w/4mm Bullets (245Kv)
Back Order Now
You may back order this item and it will ship when it arrives.
FREE Shipping Eligible! Learn More
Price: $172.99

Please Log in to receive a notification when this item arrives in stock.

Save In List
Note: Manufacturer does not allow coupons
This item earns up to 173 VIP Reward Points Learn More
The E-flite Power 160 Brushless Outrunner Motor with 4mm Bullets  is a great choice for scale and sport model airplanes. This motor is ideal for 160-size airplanes weighing 12-20lbs (5.4–9kg), 3D airplanes up to 15lbs (6.8 kg), or models requiring up to 2700 watts of power. Package includes one motor, one motor mount, two prop adapters, needed tools and hardware.

  • Ideal for 3D airplanes up to 15lb (6.8 kg)
  • High-quality construction with ball bearings and hardened 8mm steel shaft
  • Includes mount and mounting hardware
  • External rotor design for better cooling
  • High-torque alternative to inrunner brushless motors
  • Includes two 12mm prop shaft adapters tapped out for 10–32 threads
  • Slotted 14-pole outrunner design
  • Ideal for models requiring up to 2700 watts of power
  • Equivalent to or surpassing the power of a 160-size, 2-stroke, glow engine for 12–20 lb (5.4–9 kg) airplanes
RPM/Volt (Kv): 245
Voltage: 33.3–38.4 (9-10S LiPo - 28-32 cell NiMH)
Idle Current (Io): 1.45A @ 10V
Recommended Propeller Range: 18x8 to 20x10
Motor Design: Outrunner
Motor Type: Brushless
Wire Gauge: 13 AWG
Connector Type: 4mm Bullet
Bushing Or Bearing: Bearing
Shaft Diameter: 8mm (.30 in) (Includes two 12mm threaded prop shaft adapters with 1.5 pitch) 

Needed to Complete: 
  • (1) 75-110A HV Brushless ESC
  • (1) 9-10S LiPo Battery or 28-32 cell NiMH
  • (1) 18x8 - 20x10 Propeller

This product was added to our catalog on December 5, 2007

Saturday, Jun 2 2018 (about 5 years ago)
E-flite Power 160 Brushless Outrunner Motor w/4mm Bullets (245Kv)
You're going to need a GPS.

I own the 110 and let me tell you, it is spooky powerful! It turns props that scare me. I don't want to be anywhere near it while it's running. It eats all the power I can afford to throw at it. I have a friend that put a 110 on his wheelchair and it takes all 300 pounds of him up ramps! So if you are serious about getting a 160, fear not weather it has the power you need. BUT DO NOT FORGET, the ESC required to drive it will most likely cost you ±$200 or so. Make sure you do the math for required amps, put your 12 to 14 inch prop on it, stand real far back and fly it into the stratosphere!

Oh, and by the way, $150 is a very good price for that motor.