E-flite Mini Pulse XT Plug-N-Play
EFL2450
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons
Based on the popular Hangar 9 Pulse XT 40, the E-flite Mini Pulse XT PNP is perfect for anyone moving up from a trainer or intermediate to expert pilots looking for a no-fuss parkflyer. Its friendly flight characteristics won’t overwhelm the newer pilot, but it’s still agile enough for a wide range of basic aerobatics. And it can be flying in no time because it comes out of the box with the motor, ESC and servos installed. All that needs to be added is the transmitter, receiver, battery pack and charger of choice. Even the control linkages are installed.
Satisfy your flying fix with the E-flite Mini Pulse XT PNP. It has all the features which make for a convenient flight experience. An easy-access magnetic battery hatch stays firmly in place yet makes swapping out batteries quick and easy. The steerable tail wheel is built into the rudder so takeoffs and rollouts on breezy days are more controllable. Two hex screws hold the wing firmly in place making it easy to remove for transport. The bolt-on tail is secured with two heavy-duty lock nuts. The tough aluminum landing gear comes already painted along with a factory-painted fiberglass cowl and wheel pants. This exclusive Plug-N-Play configuration lets you get airborne in less than an hour.
Features
Wingspan: 42.5 in (1080mm)
Overall Length: 37.5 in (875mm)
Wing Area: 330 sq in (21.5 sq dm)
Flying Weight: 25 - 27 oz (795-965 g)
Motor Size: Installed 450 BL Outrunner, 890Kv (special PNP motor)
Radio: 4 channels or greater
Servos: 9 gram (4 installed)
Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
CG (center of gravity): 2 3/4 in (70mm) behind the leading edge of the wing
Prop Size: 10x7 Slow Flyer (included) or 10x8 Electric recommended upgrade)
Spinner Size: 1 3/4 in (included)
Hardware Included: yes
Speed Control : 22A Brushless (installed)
Recommended Battery: 2100mAh 11.1V Li-Po
Control Throw (Ailerons): 3/8" (9mm) Low or 1/2" (13mm) High Up/Down
Control Throw (Elevator): 1/4" (6mm) Low or 1/2" (13mm) High Up/Down
Control Throw (Rudder): 1-1/4" (32mm) Low or 1-1/2" (38mm) High Left/Right
Scale: park flyer
Approx. Assembly Time: 1 - 2 hours
Satisfy your flying fix with the E-flite Mini Pulse XT PNP. It has all the features which make for a convenient flight experience. An easy-access magnetic battery hatch stays firmly in place yet makes swapping out batteries quick and easy. The steerable tail wheel is built into the rudder so takeoffs and rollouts on breezy days are more controllable. Two hex screws hold the wing firmly in place making it easy to remove for transport. The bolt-on tail is secured with two heavy-duty lock nuts. The tough aluminum landing gear comes already painted along with a factory-painted fiberglass cowl and wheel pants. This exclusive Plug-N-Play configuration lets you get airborne in less than an hour.
Features
- Plug-N-Play® design—just add battery pack, transmitter, receiver and charger
- Lightweight balsa/lightweight plywood construction
- Covered in genuine Hangar 9® UltraCote®
- A 450-size brushless motor at 890Kv that comes factory-installed to provide excellent sport power and save pilots time
- 22-Amp Brushless ESC installed
- Four factory-installed 9-gram sub-micro servos
- Factory-installed hinges and control horns
- Factory-painted aluminum landing gear and fiberglass wheel pants
- Steerable tail wheel
- Bolt-on wing and tail
- Easy-access magnetic battery hatch
- Design based on Hangar 9’s popular Pulse™ 40 XT
Wingspan: 42.5 in (1080mm)
Overall Length: 37.5 in (875mm)
Wing Area: 330 sq in (21.5 sq dm)
Flying Weight: 25 - 27 oz (795-965 g)
Motor Size: Installed 450 BL Outrunner, 890Kv (special PNP motor)
Radio: 4 channels or greater
Servos: 9 gram (4 installed)
Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
CG (center of gravity): 2 3/4 in (70mm) behind the leading edge of the wing
Prop Size: 10x7 Slow Flyer (included) or 10x8 Electric recommended upgrade)
Spinner Size: 1 3/4 in (included)
Hardware Included: yes
Speed Control : 22A Brushless (installed)
Recommended Battery: 2100mAh 11.1V Li-Po
Control Throw (Ailerons): 3/8" (9mm) Low or 1/2" (13mm) High Up/Down
Control Throw (Elevator): 1/4" (6mm) Low or 1/2" (13mm) High Up/Down
Control Throw (Rudder): 1-1/4" (32mm) Low or 1-1/2" (38mm) High Left/Right
Scale: park flyer
Approx. Assembly Time: 1 - 2 hours
This product was added to our catalog on March 4, 2009
Anonymous
Verified Owner
Saturday, Feb 18 2012 (about 12 years ago)
E-flite Mini Pulse XT Plug-N-Play
I MUST SAY THAT I AM IMPRESSES WITH THE MINI PULSE, THIS IS ALOT OF BANG FOR THE BUCK AND HAS QUALITY SERVOS ETC. IT WAS VERY EASY TO PUT TOGETHER AND IT PERFORMS EVERY 3-D MANUVER WITH EASE. THIS LITTLE PLANE IS MORE THAN I EXPECTED, SNAP ROLLS,HOVERS,KNIFE EDGE AND JUST GOOD OLD PARK FLYING, DONT LET THE SMALL 450 MOTOR FOOL YOU, IT IS HARD TO STALL THIS PLANE. I WOULD DEFINATLY BUY ANOTHER OF THESE SHOULD...OR WHEN THE NEED CALLS FOR IT. NOW I WANT A PULSE XT 40, TOO BAD IT ISNT OFFERED IN A PNP VERSION
Jeffrey Jacobsen
Verified Owner
Tuesday, Sep 7 2010 (about 13 years ago)
E-flite Mini Pulse XT Plug-N-Play
What a great sport plane! at high throttle it's a little rocket and slow and stable at lower power. I wanted to try out the design so I got the Mini to see if I liked it, had I know how well the Pulse design flies I would have bought the XT 25e and am drooling over it thinking it will be even more stable and easier to see. It doesn't get much better than the pulse. High speed snap rolls are so fast I think it's going to break apart. My kit had a defective 22amp ESC that had bad timing making it seem like the motor was bad, I pulled the 30amp pro out of my Apprentice and it solved the problem, talking to the right person at Horrizon got me a new 30amp Pro ESC shipped for free. One tail servo needs to be reversed as the directions way doesn't reach the shorter link supplied. I have an E-flite T34 Mentor and it's kind of a dog compared to the Pulse so I might take the electronics out and use for a new Pulse XT 25e as I love this design so much...