Servo Overview:
The EcoPower WP120T Coreless Waterproof "High Torque" Metal Gear Digital Servo is a great choice if you are looking for an affordable, waterproof, high voltage upgrade. The WP120T makes 337 oz-in of torque and .11 transit speed at 6.0V. But when you crank the voltage up to 7.4V, the WP120T delivers 400 oz-in and .09 speed, making it an excellent option for scale crawlers, 1/10 monster trucks, 1/10 2WD and 4WD buggies. Plus, its a great option for boats, and other surface applications that can benefit from a high torque, high voltage, waterproof servo.
The WP120T is waterproof up to 1-meter so driving in the rain, puddles, snow and mud are not an issue. Metal gears were used to create a durable gear train that can be serviced if needed, and the plastic case with aluminum center section keeps the servo running cool while remaining lightweight. Plus, the digital circuitry allows compatibility with vehicles that use traction control/gyro systems, making the WP120T a viable option for models that are equipped with a stability system. Want more? We back this servo up with a 1 year warranty - so drive with confidence knowing that EcoPower has your back, with a tough, powerful servo upgrade that wont break the bank - and wont slow you down when mother nature tries to change your plans.
Features:
- Includes one aluminum clamping servo horn
- Affordable option for 1/10 monster truck, 1/10 2WD and 4WD buggies, trucks, boats and more!
- Waterproof up to 1 meter
- 337 oz-in of torque and .11 transit speed @ 6.0V
- 400 oz-in of torque and .09 transit speed @ 7.4V
- Digital circuitry
- Coreless motor
- Metal gears
- Lightweight plastic upper and lower case w/black anodized aluminum center case
- Dual ball bearings
- 220mm servo lead
- Includes plastic star, 4 way, dual, single and round type servo horns and mounting hardware
- 1 Year warranty against manufacturer defects*
Servo Model
|
WP120T
|
Recommended Application | 1/10 Scale Surface
|
Waterproof
|
Yes
|
Operating Voltage | 4.8 - 7.4V |
Operating Temperature | 14° to 140° F (-10 to +60° C) |
Operating Speed @ 6.0V | 0.11/60° sec |
Operating Speed @ 7.4V | 0.09/60° sec |
Dynamic Torque @ 6.0V | 337 oz-in (24.4 kg-cm) |
Dynamic Torque @ 7.4V | 400 oz-in (28.8 kg-cm) |
Motor Type | Coreless |
Output Shaft | 25 Tooth |
Gears | Full Metal
|
Weight | 53g |
Pulse/Frequency | 1520?s / 333hz |
NOTE: Be sure to set your End Point Adjustments when using this servo to ensure long life and performance. For more information on End Point Adjustments, please watch the video below.
This product was added to our catalog on May 10, 2018
- Arrma Big Rock 3S BLX
- Arrma Granite 3S BLX
- Arrma Infraction MEGA
- Arrma Infraction V3 3S BLX
- Arrma Senton 3S BLX
- Arrma Vorteks 3S BLX
- Axial Capra
- Axial RBX10 Ryft
- Axial SCX10 II
- Axial SCX10 III
- Losi TENACITY DB
- Losi TENACITY TT Pro
- Traxxas Hoss
- Traxxas Rustler 4x4
- Traxxas Slash 4x4
- Traxxas Stampede 4x4
- Traxxas TRX-4
- Traxxas TRX-4
Get yours today.
I am going to replace the gears for 12 dollars because I don't have the cash right now to buy a better option. save your self the hassle and get a better servo. this was a big let down for me. It was a very smooth servo for the short time it was working.
After the rebuild my luck was not any better, I had the same problem it just lasted a little bit longer than the original. My end points are set correct and after going with a cheaper servo I have had no issues at all (Though the ECO was smoother and quieter)
I love Amain but not so much the servo experience. I don't like giving bad reviews I am just giving my honest opinion.
Got two weeks out of this on brand new Traxxas Widemaxx that is driven mostly on grass and fine gravel and no bashing. Started out ok, better than stock but started getting slower and today the gears must have stripped in addition to a plastic tab for mounting snapped off. Put out a little more money, this one is not recommended by me.
So here I am ordering a gear set.
Hopefully it doesn't fail during championships next month.
Popped one in my erevo 2.0 and I’ve loved it. Plenty of speed and power, excellent value. Update: it’s been quite a long time and I still find this to be the best value in servos from a reputable brand. As long as your following standard procedure (servo saver with a reasonable amount of protection, no more than average 1/8 scale basher wheels (bead locks may not be good unless used in a low speed application) it’s the fastest tough high torque servo on the market.