Yokomo BD8 2017 Black Series 1/10 Electric Touring Car Kit (Aluminum) w/PCS - Pitch Control System
The Yokomo BD8 2017 Black Series Aluminum Chassis 1/10 Electric Touring Car Kit is Yokomo's flagship touring car platform. By earning the 2016 IFMAR ISTC Champion crown, the BD8 2017 has proven itself at the highest levels. The chassis features a variety of updates and setup options that allow you to tune it for for both high and low grip conditions, making it an ideal chassis for serious racers. This promotional version includes Yokomo's PCS (Pitch Control System). Installing this system improves the capability of the BD8 on a much broader range of tracks, because it makes finding the right set up much easier.
PCS (Pitch Control System)
PCS a kit (YOKB8-PCS) that connects the motor mount to the servo mount with a tie rod. This can increase the pitching rigidity while maintaining the torsional characteristics of the chassis. By adjusting the presence / absence of the tie rod and the number of mounting screws on the motor mount, it is possible to change the handling according to surface conditions.
- Wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
- Photos show carbon chassis kit. The product you receive will include an aluminum chassis.
- Promotional offer: Pitch Control System included in this version.
- Center Aligned Front Belt System: The front belt now runs up the middle of the car which improves the car's balance and smoothness during on-power acceleration.
- Large 20T Centre Pulley: The center pulley has been changed to allow the front and rear belt to run off the same pulley, providing a longer wear for front and rear belts while also providing improved acceleration.
- Bush / Insert Suspension Blocks: Yokomo have now moved to the bush / insert style suspension blocks, allowing a simple and wide range of roll center adjustment.
- Motor Mount / Flex System: The BD8 2017 carries a smaller motor mount design, which has moved the motor forward inboard (Center) to improve the cars overall balance. The motor mount also has screw placements underneath the chassis which will improve the cars overall grip and corner speed.
- Lightweight Graphite Plastics: The BD8 Suspension arms, Front Caster Blocks, Knuckles, and rear hubs are molded from a unique lightweight graphite. This material improves the cars performance in a range of different conditions.
- Servo Mount: The redesigned servo mount runs further up the center line of the chassis making a slight adjustment to the flex characteristics of the car. The servo mount is included as standard.
- Front Double Joint DCJ's: Yokomo 's high-quality front DCJ's are included as standard.
- Bulkhead X Braces: Carried over from the BD7, the X braces gives drivers more tuning options in different conditions.
- Big Bore SLF 2 Short Shocks: Yokomo's big bore high capacity shocks which also carry a low COG design are included as standard.
Overall Length: 354mm
Overall Width: 190mm
Wheelbase: 257mm (adjustable)
Internal Gear Ratio: 1.7:1
Fully Equipped Weight: 1350g
Needed To Complete:
- 2-Channel radio system
- Electronic Speed Control
- 540 Motor
- Steering servo
- 7.4V LiPo battery pack
- Compatible battery charger
- Touring car tires
- 190mm touring car body
- Polycarbonate paint for body
This product was added to our catalog on April 11, 2017.