RC4WD Trail Finder 2 Truck "SWB" Short Wheelbase Chassis Kit
This is the RC4WD Trail Finder 2 Truck "SWB" Short Wheelbase Chassis Kit. The TF2 SWB kit combines detailed styling and aggressive performance with a short wheelbase chassis to provide a balance of capability and performance that scale enthusiasts demand. With its R3 single speed transmission, 4WD drivetrain, bullet-proof transfer case and quality metal components throughout, the TF2 is truly a work of art in both appearance and performance. The TF2 SWB is compatible with an incredible range of TF2 option parts that not only add to the scale look of the truck, but also enhance the performance and durability.
- The TF2 includes the Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and 32P widened gears for durability.
- The most scale accurate axles on the market, the RC4WD Cast Yota II axles feature innovative round knuckles, lower mounting points and compact offset pumpkins.
- The R3 Single Speed Transmission comes with a cast aluminum case and wider gears to allow for more abuse along with a Delrin spur with slipper clutch.
- Drawing on the success of the RC4WD MOA gear sets, the TF2 drivetrain has the most durable gears RC4WD has to offer so the TF2 will stay on the trail, day after day.
- The Metal Driveshafts for the TF2 feature bulletproof steel universals and a high quality plastic shaft for great driveline angles and durability on the trail.
- The TF2 includes a set of RC4WD Ultimate Scale Shocks. Designed for ultimate scale looks and ultimate performance. The shocks are machined from billet aluminum and internally sprung.
- The TF2 includes a set of RC4WD Black Stamped Steel 1.9 Internal Beadlock Wagon Wheels. Super tough black painted finish, aluminum internal ring and popular 5 lug design.
- The TF2 Chassis is a machined billet aluminum ladder frame design with leaf springs, scale shock hoops, chassis servo mounts and hard body mounts. 4-link conversion available.
- Every TF2 needs a tough set or rock grabbing tires and the included Mud Thrashers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.
- Realistic Billet Aluminum Ladder Frame "SWB" Chassis
- R3 Single Speed Transmission
- Center Mounted Realistic 4x4 Transfer Case
- Yota II Ultimate Scale Cast Axle
- True to Scale Leaf Spring Suspension
- 5 Lug Wagon 1.9 Steel Stamped Beadlock Wheels (Black)
- Mud Thrashers 1.9 Scale Tires
- Realistic Bumpers and Skid Plate
- Chassis Mounted Steering Servo
- RC4WD Scale Shock Absorbers
- Plastic Rod Ends
- Full Ball Bearings
- TF2 SWB Dimensions:
- Wheel Base: 9.9in / 242mm
- Width: 8.3in / 211mm
- Height: 5.55in / 141mm
- Ground Clearance: 2.3in / 58.5mm
- Overall Length: 15.31in / 389mm
- Weight: 62.1oz / 1.76kg
- Hammer Transfer Case:
- Ratio: 1.47:1
- Gears: Wide 32P steel gears
- R3 Single Speed Transmission:
- Ratio: 1.78:1
- Pinion/spur: 14/64 = 4.57:1
- Cast Yota 2 Axles:
- Ratio: 15/40 = 2.67:1
- Width at hex: 176.5mm
- Type: 1.9 5 lug Wagon Wheels
- Hub: Pin type
- Width: 25mm
- Back spacing: 11mm
Needed to Complete:
- Motor (35t, 45t, or 55t)
- Electronic Speed Controller "ESC"
- Radio and Receiver (3 channel or more)
- Standard Size Steering Servo
- Battery 6-Cell NIMH or comparable Lipo battery (Consult your "ESC" manual)
- Battery Charger (Consult you battery Guide)
- Hex Drivers (1.5mm, 2mm, 2.5mm)
- Long Nose Pliers
- Associated Thread Locking Adhesive
- Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
- Tamiya Body:
- Tamiya Jeep Wrangler Body (TAM9335171)
- Tamiya Wrangler M Parts (TAM9115239)
- Tamiya Jeep Wrangler L Parts (TAM9115238)
- Tamiya Jeep Wrangler K Parts (TAM9115062)
- Tamiya Jeep Wrangler H/J Parts (TAM9005439)
- Tamiya Jeep Wrangler Metal Parts Bag (TAM9400864)
- Clear Lexan Windshield for Tamiya Jeep Wrangler Body (RC4ZB0012)
This product was added to our catalog on April 7, 2015.