ParkZone Extra 300 Bind-N-Fly Electric 3D Airplane (BNF)

Designed by Mike McConville, the ParkZone Extra 300 BNF is equipped with a powerful brushless motor and Li-Po battery combination that provides more than enough power for precision aerobatics. Positive and negative G maneuvers, snap rolls and more are all within the Extra's capabilities, with virtually no roll or pitch coupling. Best of all, you can have it flying in as little time as it takes to charge its battery and bind it to your full range Spektrum or JR DSM aircraft transmitter. Charge-and-Fly™ convenience, outstanding flight performance and beautiful scale detail—with the ParkZone Extra 300 BNF, you get it all.

Features:

• Ready to fly in minutes once bound to your full range DSM2™ aircraft transmitter (sold separately)
• 3S 2200mAh 25C Li-Po battery and balancing charger included
• Powerful 15-size brushless outrunner motor installed
• Spektrum™ AR500 DSM2 5-channel sport receiver installed
• E-flite® Pro 30A Switch-Mode BEC ESC installed
• Full 4-channel control – throttle, aileron, elevator and rudder
• Dual aileron servos for precise control
• Durable and lightweight Z-Foam™ construction
• Steerable tail wheel installed
• Two-piece plug-in wing

Specifications:

• Wingspan: 40.6 in (1030mm)
• Overall Length: 36.8 in (935mm)
• Flying Weight: 34.5 oz (980 g)
• Motor Size: 15-size brushless outrunner (950Kv)
• Servos: 2 - PKZ1090 (rudder and elevator); 2 - PKZ1059 (ailerons)
• Trim Scheme Colors: White with orange and purple
• CG (center of gravity): Approximately 3.0 in (76mm) from leading edge at wing root
• Prop Size: 10.5 x 9
• Speed Control : EFL 30A Pro SB Brushless ESC
• Recommended Battery: 11.1V 3S 25C 2200mAh Li-Po (included)
• Charger: DC powered variable rate balancing 2- to 3-cell Li-Po
• Landing Gear: Fixed main with steerable tail wheel

This product was added to our catalog on June 16, 2010