KO Propo RSx3-one10 Ver.D Low Profile High Speed Servo w/Servo Selector (High Voltage)

KO Propo RSx3-one10 Ver.D Low Profile High Speed Servo with included Servo Model Selector. The Ver.D model servo is a dedicated design, optimized for 2WD drift applications.

The KO Propo Servo Model Selector allows you to store up to 5 different model pre-set memories in the servo, and recall them on demand. Compatible with KO Propo RSx/RSx2/BSx2 servos. Pre-sets are stored using the ICS USB adapter (KOP61028 - not included).

Stylish Laser Engraving + Top Case Milling
Laser engraving on 3 sides - the top case, and both sides of the middle case. Combined with the black anodized finish, it can be mounted in any chassis, regardless of brand.

HCS (High Speed Communication System)
This is a high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers. If you want to use servos by HCS, please use with HCS compatible receivers.

Coreless Motor
The RSx3-one10 Response provides a smooth operating feeling by the use of a Coreless motor.
A smooth cornering characteristic is provided.

Installed Preset Settings
The following factory MODEL settings are pre-installed. You can change settings using the optional Servo model selector (KOP61029 included) to suit your car. It is useful for beginner to expert drivers.

1. Standard setting (Default)
2. Mild setting
3. Standard setting
4. Fast setting
   
5. Expert setting

Made in Japan
The RSx2-one10 series: all essential parts such as the case, the gear, the motor are made in Japan. At the domestic factory the close inspections are executed through the delivery to secure “Thorough Made in Japan” product reliability.

2.4GHz & High Voltage Optimized
Current servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-Po batteries respectively. This creates a huge demand upon the servo. The RSx is the racing servo with the durability and operability to employ this high-spec demand.

ICS
You can change servo's setting when you use KO Propo "ICS Servo Manager" software. Adjust the parameter of stretch for more retentivity in High grip condition, less retentivity in Low grip situation, You can select value based on the surface grip for the best servo performance.

Features:

• Recommended for 1/10 EP 2wd on road DRIFT Car
• Hard alumite aluminum gear
• Core-less motor
• Dual bearings
• The hard servo gear shaft
• The aluminum top case
• The aluminum heat sink middle case
• Black cable
• Gold plated connector
• HCS Compatible

Specifications:

• Torque:
• @7.4V: 113 oz-in (8.2 Kg-cm)
• @6.0V: 97.2 oz-in (7.0 Kg-cm)
• Speed:
• @7.4V: 0.08sec/60deg
• ?@6.0V: 0.09sec/60deg
• Dimensions: 41×25.5×21mm (Low Profile)
• Weight: 48.0g
• Operating voltage: 6.0 to 7.4V (Lipo,Life,Ni-MH)

Includes:

• (1) Servo
• (4) Grommet
• (1) Screw for Horn

This product was added to our catalog on November 1, 2018