Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)

In Stock Online
Usually ships in 24 hours
FREE Shipping Eligible! Learn More

You might also need...

LiPo Safe Charge Bags
$21.49 - ProTek RC Flame Resistant LiPo Charging Bag (Large, 23x30cm) (addon details...)
$60.00 - Bat-Safe LiPo Charging Case (addon details...)
None
Charge Leads
$14.49 - ProTek RC "Squid" Multi Connector Charge Lead (addon details...)
$15.99 - ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) (addon details...)
None
Price: $224.99
 
Read Reviews
Write a Review
This item earns up to 225 VIP Reward Points Learn More
The Hitec X4 AC Pro Four Port AC/DC Multicharger is a high-performance, microprocessor-controlled charger/discharger with extensive battery management capabilities. Capable of operating on 100 - 240 volts AC household current or from an 11 - 18 volts DC power source, this multi-faceted powerhouse exudes a total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output when in DC mode. The X4 AC Pro allows you to connect up to four batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb) to any of the charging channels with each channel performing independently of one another. Additional features include “Charge Master” software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation.

Specifications:
  • AC Input: 100 - 240 Volts AC
  • DC Input: 11 - 18 Volts DC
  • Total Charge Circuit Power on AC Power: 200 Watts with Power Distribution
  • AC Power Distribution
    • Channels A & C: 100 Watts Total
    • Channels B & C: 100 Watts Total
  • Power Distribution Adjustable Range
    • Channels A & B: 50 - 100 Watts
    • Channels C & D: 0 - 50 Watts
  • Total Charge Circuit Power on DC Power: 300 Watts Total Power
    • Channels A & B: 100 Watts each
    • Channels C & D: 50 Watts each
  • Charge Current
    • Channels A & B: 0.1 - 10.0 Amps
    • Channels C & D: 0.1 - 5.0 Amps
  • Discharge Wattage: 10 Watts per Channel
  • Discharge Current: 0.1 - 2.0 Amps per Channel
  • Discharge Current for Lithium Battery Balance: 200 mAh
  • LiPo, LiHV, LiFe and LiIon Cell Count: 1 - 6 cells
  • NiMH / NiCd Cell Count: 1 - 15 cells
  • Pb / Lead Acid Voltage Range: 2 - 20 VDC
  • Battery Capacity Range: 100 - 50,000 mAh
  • Auxillary Output: 5 Volt 2.1 Amp DC USB Device Charge Port
  • Communication Methods
    • USB Port for PC Control & Firmware Upgrades
    • Bluetooth 4.0 for Smartphone Apps
  • Dimensions: 3.8 x 7.2 x 2.8 in / 97 x 182 x 71mm
  • Weight: 47 oz / 1335g
WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.
Verified Owner
Wednesday, Feb 28 2018 (about 2 years ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
I love this thing! I was using a power supply with an iCharger before this. It worked good but there were wires all over the place and lots of stuff cluttering up my pit area. This thing cleaned all of that up. I also like that I can charge four batteries separately. The picture doesn't show it but it is a color screen. Lots of info on there and this will charge anything you've got.
Verified Owner
Tuesday, Jul 30 2019 (about a year ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
Its an ok charger. If you have a bunch of 2s batteries, it’s great. When you charge 4s batteries is where it’s limitations show. I set the charger for 6.5 amp on a 6500mah 4s battery (1c) but the charger maxes out 3.3 amps while charging. Charging this battery at 1/2c takes about 2 hours. Its the same if i set to 10 amps, it still charges at 3.3 amps. It is incredibly slow when charging high mah 4s batteries. Charging these batteries at such a slow rate would prolong the lifespan of the battery, so i guess thats a plus. If you need to charge high mah 4s batteries quickly, this charger is not for you. I feel if you set the charge rate at 6.5 amps, it should charge at 6.5 amps. Im going to have to shop for a better charger for my 4s lihv batteries.
Verified Owner
Sunday, Mar 31 2019 (about a year ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
Works great!,and easy to use. I’m balance charging two 4s lipos at a time with this charger,and other batteries.
Verified Owner
Wednesday, Jun 10 2020 (6 months ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
X4 went "blue screen" and quit functioning, no information showed on the screen, cooling fan would run, two 4000mHa lipo batteries had been charged and storage charged when the X4 quit functioning.
Hitec Electronics are good products.
I have been using Hitec X1 for three years without any malfunctions.
Electronics are that way, sometimes they fail.
Verified Owner
Wednesday, Jun 3 2020 (6 months ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
I love this charger it does everything you want it to do without issues. However, the Bluetooth does not work with the newer phones and I imagine that is an issue with newer OS since it worked with my older Android phone but not my newer One 6T.
Also the HiTec website does not have the latest Firmware, so when I wanted to troubleshoot the issue ( the android connection issues) I ended update and will downgrading the FW from the website and thought I would be able to get the latest one from the website or the PC app but could not find the version that came with the unit.
I ended up learning that SkyRC and Dynamite both have the same model just different colors. The customer service even said its okay to use the SkyRC FW since it was the latest one.
The PC software works perfectly and I find myself not touching the unit. Overall I am satisfied with this charger.
Also it does NOT have IC5 leads make sure to get those if you need them.
Verified Owner
Saturday, Mar 7 2020 (9 months ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
I like it, I only get out some weekends to fly( heli's) but the few times I've used it works well. My charger came with two balance boards, I believe in one the youtube video's the reviewer commented the charger only came with one balance board. The charger is easy to use and the bluetooth function works well, although the range is rather limited compared to my other bluetooth devices. The bluetooth function was one of the driving features for me, as well as the four port charging.
Verified Owner
Monday, Dec 2 2019 (12 months ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
Great charger for the size of battery packs I use!
Verified Owner
Friday, Nov 29 2019 (about a year ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
Works great! When we go out we have a minimum of 2 (2s) and 2 (3s) apx 5000mah each to charge. This take care of all of them with no fuss, and the bluetooth app is super handy!
Monday, Feb 11 2019 (about a year ago)
Hitec X4 AC Pro Four Port AC/DC Multicharger (6S/10A/300W)
Just picked up a used one of these after my Reedy blew up AGAIN. This is one awesome charger!!! I love it!!