Flite Test Balsa Basics Simple Cub Electric Airplane Kit (1070mm)

Price: $59.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is the Simple Cub balsa kit from Balsa Basics. The Balsa Simple Cub is the start of a new phase for the Vintage Model Company. The Balsa Basics Series is envisioned as a ‘next step’ for those wanting to venture into more traditional model aviation materials without intimidation. Balsa has a reputation for being hard to get into, complex and fragile. The Vintage Model Company has therefore teamed up with the Flite Test to bring you this new range of simple, robust and fun flyers made primarily of wood. As with Flite Test's foam board, the Balsa Simple Cub goes together with common build techniques. This model will teach you how traditional model aircraft go together with chunky wing ribs and fuselage formers that slot together without the need for a printed plan. This speeds ups your build time meaning you can have a virtually finished airframe ready for covering in just a couple of hours.

The Cub is an ideal trainer. Being a 3-channel aircraft, you can develop your skills from the ground up. Most of the time the Cub is happiest cruising along at minimum throttle, however, it can also perform basic aerobatics such as loops and wingovers. Flight times with the recommended battery can be up to 20 minutes on calm days. With a large 1000mm wingspan, you’ll also be able to take on windier conditions.

Note: Wheels not included 


Specifications:

Wingspan: 42" / 1070mm
Build Skill Level: Absolute Beginner
Flying Skill Level: Absolute Beginner
Channels: 3 (throttle, rudder and elevator)
Power System: Electric Brushless
Recommended Motor Size: 2212-1050kV (approximately 150w)
Propeller Size:  9x4.5
Recommended ESC Size: 35A
Recommended Battery:1000mah-1500mah 3s 30c Lipo 

Kit Contents Include:

  • (1) Sheet of 3mm Plywood parts
  • (7) Sheets of balsa parts
  • Landing gear wire
  • Push rod wire
  • Control horns
  • Thin wooden dowel 

Needed to Complete:

  • (1)  Brushless Motor: Flite Test B Radial or 370 Size, 1200kV Minimum
  • (1) Propeller: 9x4.5
  • (1) ESC: 20-30 Amp
  • (1+) Battery: 3S 11.1V LiPo 1300mAh
  • (3) Servos: ~9 Gram Micro Servos
  • (1) 2.75" Wheels (FLT-2054)
  • (1) 2.4GHZ Radio System (Radio & Receiver)
  • Covering Material
  • Covering Iron
  • Misc. Building Supplies.

This product was added to our catalog on June 11, 2020