This Dynamite Passport Duo Touch HV Charger builds on the success of the the previous non-touch Passport Duo but adds an intuitive easy-to-use touch screen display and HV charging capabilities for LiHV capable batteries. The charger also sports 200W per channel with an adjustable 0.1-10A charge current per output, and a plethora of circuitry protections.
Features:
- Intuitive Touch Screen Display
- HV (High Voltage) charging / discharging / balancing
- Charges Li-Po/Li-Fe/ (1–6 cell), Ni-MH (1–15 cell) and Pb battery types
- 500W internal power supply
- 0.1–10.0A Adjustable charge current per output
- Space saving dual output design
- 200W charge power per output
- 100-240 VAC (50/60Hz) or 11-18V DC input voltage
- 25W discharge power per output
- Detachable AC power cord / Optional DC power cord
- Includes 2 EC3 charge connector and a variety of other connectors included
- Short circuit protection
- Over temperature protection / Over current protection
- Low input voltage protection
Specifications:
TAC Input: 100-240V AC
Ampere Meter: Yes – on main LCD display
Battery Balance Connector: JST_XH
Battery Temperature Monitoring: Yes - Temperature Sensor (not) included
Battery Type: LiFe, LiIon, LiPo, NiCd, NiMH, Pb
Circuit Breaker: No
Cooling Method: Fan
DC Input: 11-18V DC
Discharge: Yes
Display: Monochrome Touch Screen, 400x240
Fuse: No
Height: 0 in (0mm)
Input Connector: AC cord, detachable, North American plug
Insulation Type: Earth ground
Integrated Balancing: Yes - Internal Balancer & External Adapter
Length: 0 in (0mm)
Low Input Voltage Protection: Yes
Maximum Continuous Discharge Rate: .01 - 5.0A/25W per channel
Model Memory: Yes - 20 Battery Settings
Output Connector: Banana to EC3, Banana to Deans Compatible, Banana to Rx
Over Current Protection: Yes
PC Connectivity: Yes – USB, external adapter required
PC Required: No
Peak Detection: Yes
Reverse Polarity Protection: Yes
Safety Timer: Yes
Selectable Charge Rate: Yes - Incremental (0.1A Increments)
Short Circuit Protection: Yes
Software Updates: Yes - via USB port
Thermal Protection: Yes
Voltage Meter: Yes – on main LCD display
Weight: 0 lbs (0kg)
Width: 0 in (0mm)
WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.
This product was added to our catalog on October 24, 2016