BetaFPV BT2.0 1S Cable Pigtails are the most significant revolution in 1S Tiny Whoop Drone technology. The BT2.0 1S whoop cable pigtail is an option for you to modify your drone or 1S flight controller board. Equipped with 1.0mm bullet connectors, the BT2.0 can support 9A continuous current and 15A burst. This will help you extract the true potential of a brushless whoop type drone, and get peak performance. Compatible with BT2.0 300mAh 1S battery.
HOW TO RESOLDER YOUR BOARD WITH BT2.0 CABLE
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-).When you resolder your board, please pay attention to the connection method.
NOTE: Blue is the positive pole (+), white is the negative pole (-).
- BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
- BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
- By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
- With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.
This product was added to our catalog on May 22, 2020