Ares X:Bolt 250 FPV Racing Drone Kit (Complete)
The Ares X:Bolt 250 is a feature-packed 250 class FPV racing quad. A lightweight carbon fiber frame, folding 4mm thick carbon fiber arms and aluminum standoffs help make the X:Bolt both durable and compact. The included power system for the X:Bolt is designed to be versatile, powerful and efficient utilizing high-performance 2206 2250kv brushless motors paired with 18A speed controls that run the latest BL heli firmware. And, if you want to go beyond the stock 3S set-up, the power system was designed so you can extend to flying a 4S LiPo battery and up to 6" props (available separately).
The power distribution board Included with the X:Bolt was designed to accommodate a wide range In voltage needs, and with both 5V and 12V power out, you're able to use just about any FPV accessory — plus It even has a built-in 3A BEC. The heart of any quad is the flight controller, and the X:Bolt doesn't disappoint there. It comes with a Naze32 bit controller with pre-loaded, customizable Cleanflight software that operates popular accessories like RGB LEDs that fit directly on the mount that's included with the X:Bolt frame.
The FPV system consists of a 600tvl camera with a 100° field-of-view and a 200mW 32-channel video transmitter. The lightweight camera is attached to the frame with a 17° camera mount and provides a crystal clear picture of what's ahead — even in high-speed racing. The included video transmitter provides plenty of range, and with 32 channels available, you'll have plenty of options whether racing or just flying with friends. An aftermarket tilt camera mount option (AZSZ2937) is also available so the pilot can adjust the camera angle or take advantage of the self-leveling camera feature on the flight controller.
High Performance Motors
The included power system for the X:Bolt is designed to be versatile, powerful and efficient utilizing hi-performance 2206-2250kV brushless motors paired with 18A speed controls that run the latest BL heli firmware.
Carbon Fiber Frame
A lightweight carbon fiber frame, folding 4mm thick carbon fiber arms and aluminum standoffs help make the X:Bolt both durable and compact.
State of the Art Control Board
The X:Bolt comes with a Naze32 32 bit controller with pre-loaded, customizable Cleanflight software that operates popular accessories like RGB LEDs.
- Folding arms make the X:Bolt 250 even more compact
- Powerful 2206-2250kV brushless motors
- 600TVL Camera with 100° field of view
- 5x4.5 props included as standard equipment
- Lightweight 1.5mm carbon frame with aluminum standoffs
- Power distribution board features 5 and 12V outputs plus a 3A BEC
- Naze32 32 bit flight controller included
- 4mm Carbon Fiber arms
- Includes 18A ESC's with BLHeli firmware
Frame: Carbon fiber
Length: 203.2mm (corner to corner 260mm)
ESC: 4x 18Amp
Video: Tx 200mW (25mW in UK and Australia)
Flight Controller: Naze32 - 32 bit processor
Props: 5x4.5 props (stock), 6x4.5 props (optional)
Battery: 3-4S LiPo 1350-2200mAh (not included)
- X-Bolt 250 Racing Quad
- (4) 18Amp ESCs
- (4) 2206 2250 kV brushless motors
- Naze32 - 32 bit processing flight controller
- 600TVL camera
- 200mw VTX
- 2.4GHz Transmitter
- 2.4GHz Satellite or Standard Receiver
- 5.8GHz Receiver Monitor or Goggles
- 1300-2200mAh 3-4 Cell Lipo Battery
- LiPo Balance Charger
This product was added to our catalog on May 13, 2016.