Align T-Rex 300X Electric Helicopter w/Motor, ESC, & Servos

This is the Align T-Rex 300X Electric Helicopter Combo Kit, with motor, ESC, and Servos. The T-Rex 300X is small in size but by no means small in performance. This model adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. The narrow body design makes the mechanical structure much stronger. The battery slider and top-mounted motor design is anodized a bright red color to bring out eye catching texture on this model. A thickened aluminum alloy tail boom is included for the best torsion resistance and increases the tail support rod lifetime. The progressive lightweight landing skid makes this model the leader in its class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

The standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. This provides consistent power output and keeps stable RPM in non-stop 3D flying for presenting perfect performance. It pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

Specifications:

Length: 476mm

Height: 158mm

Width: 88mm

Main Blade Length: 230mm

Main Rotor Diameter: 525mm

Tail Rotor Diameter: 143mm

Motor Pinion Gear: 14T

Main Drive Gear: 115T

Main Drive Pulley: 40T

Tail Drive Gear: 13T

Drive Gear Ratio: 8.21:1:3.08

Weight (w/o battery): 418g

Includes:

• (1) T-REX 300X Helicopter
• (1) Set of 230 Carbon Fiber Blades
• (1) Set of 50 Tail Blade
• (1) RCE-BL25A 25 Brushless ESC
• (1) 300MX Brushless Motor (3700KV/2216)
• (3) DS450 Digital servo
• (1) Digital Tail servo

Needed to complete:

• Transmitter (6 Channel Radio)
• Receiver (6 Channel)
• Flybarless Gyro System
• (1+) LiPo Battery 3S1P 11.1V 1300mAh 30C w/XT-30 Connector
• Digital Pitch Gauge 
• Balance charger