Yokomo YD-2 PLUS 2WD RWD Drift Car Kit (Graphite Chassis)
The Yokomo YD-2 PLUS 2WD Drift Car Kit features an innovative 4 gear transmission for good throttle response and high rear traction. The design helps to provide great lateral balance with neutral steering characteristics to create more room in the line.
The design also features Ackermann settings that help to provide natural steering characteristics. The design helps to provide a full counter steer set up, with easier to drive characteristics.
As a drift car, a 4 gear transmission is an innovative concept. By setting the motor horizontally, it prevents neutral steering characteristics by preventing the left-right balance from collapsing due to the counter torque of the motor. On the other hand, since the rear traction increases with the throttle ON, it is possible to create an additional sense of stability and acceleration during corner exit. The enclosed type gear box is also attractive for its high dust resistance.
High Angle Steering
The high angle steering design helps to prevent the rear from unloading and stalling less during cornering. Of course, you can change the installation position of the tie rod to change the feel according to driver preference and the surface conditions.
Carbon Chassis & Top Deck
A carbon double deck chassis creates a pro, factory driver look. By giving it a wide form, it creates a moderate roll at the time of cornering and enhances the sense of stability. By making the behavior gentle, controllability improves, and makes the car easier to drive. By changing the battery holder, it allows the use of both full-size straight packs and shorty Li-po batter.
SLF aluminum shocks with Kashima coating for reduced piston friction. Since it is a threaded body shock you can change the car height simply by rotating the spring tensioner, and it also supports springs of various lengths. Of course, by adjusting the damping force finely by changing shock oil and piston, optimum setting can be obtained according to various road surface and driving situation.
NOTE: Wheels, tires, and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
- 4 Gear rear transmission
- Redesigned closed gear box
- Four wheel independent independent wishbone suspension
- SLF aluminum made big bore oil damper
- 2.5mm thick high rigid carbon graphite main chassis
- 2.5mm thick carbon graphite upper deck
- Aluminum suspension mount
- Aluminum motor mounting plate
- RWD exclusive high angle steering system
- 49mm rear universal shaft
- Redesigned narrow scrub knuckle
- Large rear diffuserLarge rear diffuser
Total length: 425 mm
Full width: 198 mm
Wheel base: 256 mm
Secondary reduction ratio: 1: 2.6
All equipment weight: 1500 g
Needed To Complete:
- 2-Channel radio system
- Electronic Speed Control
- 540 Motor
- Steering servo
- 7.4V LiPo battery pack
- Compatible battery charger
- Drift car tires & Wheels
- 200mm TC or Drift body
- Polycarbonate paint for body
This product was added to our catalog on August 2, 2017.