XRAY Eccentric Bushing For Aluminum Rear Hub Carrier (Set)
XRA353180
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is a set of optional molded composite eccentric bushings for the Xray XB8 line of buggies. These eccentric bushings will work with aluminum rear hub carriers #353355 and #353365. The eccentric bushings are used for rear suspension geometry adjustment. Exchanging the bushings allows 9 different geometry settings. Each bushing is marked for easy identification.
The set of bushings includes the following:
The set of bushings includes the following:
- 0 = no offset; hole in center of bushing
- 1 = hole offset 1mm from center
- 1.1 = hole offset 1mm vertical and 1mm horizontal from center
- 2 = 2° outboard toe-in bushing
Important: Always use the same bushing on left and rear aluminum rear hub and if you use an eccentric hole bushing (1, 1.1 and 2), left side must be opposite to the right side.
This product was added to our catalog on October 5, 2006