XLPower Specter 700 V2 Electric Helicopter Kit w/Main & Tail Blades

The Specter 700 V2 Helicopter from XL Power isn't just an old design with a few "upgrades" tossed in, but rather, an overhaul to bring the best performance to every single pilot. Hours of testing and months of design brings the latest Specter V2 to you thanks to world class pilots and designers chasing performance, reliability, and strength. 

The V2 introduces a 10mm lower rotor head that improves vertical mass distribution, bringing the center of gravity closer to the center of the frame. It's compact nature aids in providing even more agility for pilots looking for an incredibly reactive model. Even with it's changes, the rotor head still incorporates the durable double row angular contact bearings which increase bearing life drastically. 

Focusing on the tail of the model, the V2 has several updates here as well. First and foremost, a lack of boom supports thanks to a strong 32mm diameter tail boom. On top of this tail boom, you will find the tail linkage rod, which additionally improves the CG thanks to the relocation of the tail servo to the upper frames. By default, the tail belt is now 8mm in thickness by default, that is a custom design to ensure long life. Tail pulley sizes have been adjusted to be larger (80T/16-17T before, to 100T/20-21T in the V2). The larger pulleys significantly reduce the bending radius of the belt, which even further improves belt life and reduces belt drag. Lastly, an extreme light weight tail fin is included, to minimize as much weight from the tail as possible. 

The frame has been updated and redesigned as well, with the most exciting feature being a rear load battery tray. Thanks to an optional upgrade, it is this design paired with a battery tray with a built in connector that allows the battery to be installed and powered up - without the need to remove the canopy. The flybarless gyro tray has been moved to the front of the model, which makes wiring the heli easier, and reduces vibrations transferred to the gyro. The main gear included is the durable 15mm thick gear from the V1 Specter, but can be upgraded to a thicker 18mm for pilots looking for something nearly indestructible. Lastly, the landing gear is wider and lower, which will help reduce tipovers during auto rotations, and rough landings.

The Specter 700 V2 is sure to give all pilots an excellent platform a reliable airframe, that can perform with the greatest designs on the market. Regardless of skillset, the Specter 700 V2 is ready for you. 

Note: Canopies pictured are not final designs, or colors. Colors will change before release & photo updates will be completed to ensure accurate depictions of products to be received.

Specifications:
Length: 1300mm 
Height: 366mm 
Width: 134mm 
Main blade size: 700mm (Included)
Tail blade size: 105mm (Included)
Main to tail gear ratio: 4.76
RTF weight: 4900g - 5300g 
Main shaft diameter: 15mm 
Feathering shaft diameter: 10mm 
Tail Boom Diamater: 32mm 

Includes: 

• (1) XLPower Specter V2 700 Kit
• (1) Azure Power 700mm Carbon Fiber Main Blades
• (1) XLPower 105mm Carbon Fiber Tail Blades

Needed to Complete: 

• Transmitter (7-channel or more, helicopter system)
• Receiver (7-channel or more)
• (2) 22.2V 6S Li-Po 4500 ~ 5200mAh
• Digital Pitch Gauge
• (3) Full Size Cyclic Servos
• (1) Full Size Tail Servo
• (1) Brushless Motor (4525 or similar recommended)
  
• (1) 12s ESC (130A Minimum Recommended)
• Misc. Building Equipment

This product was added to our catalog on September 8, 2021