X Factory "Infinity" XRAY XB2 Carbon Fiber Plates includes 3 sets of Ackerman Plates for your X Ray XB2 or XT2 racing vehicles. The three sets are designated by the number of "slots" cut into the bottom edge of the steering arm.
The "2 slot" set is a direct replacement for the stock steering plates included in the X Ray kits (part XRA322292) and offers the least aggressive, smoothest steering response. This is great on high traction and higher speed layouts with fast flowing corners.
The "1 slot" set moves the outer steering tie rod ballstud out by 2mm each, giving more steering angle on the outside tire and a more aggressive steering response.
Finally, the "0 slot" ackerman plate set moves the ballstud out even more, increasing the aggressiveness further. This ackerman setting is recommended for the tightest, most technical tracks, or layouts with a lot of 180 degree corners.
- Complete Set of all 3 ackermann plates you need to tune your X Ray car's steering response.
- Each set is marked by the number of "grooves" cut in the trailing edge:
- 2 grooves - stock set, least aggressive, smoothest steering
- 1 groove - middle set
- 0 groves - most aggressive steering response
This product was added to our catalog on May 18, 2017