Wertymade Bomber Servo Winch Plate
The Wertymade Bomber Servo Winch Plate allows you to mount a servo winch in front of the battery and features multiple mounting holes and ways to mount various types of servo winches. The design also allows for a 31.5mm eye to eye fairlead hawse to mount to the front for scale points.
Here's the basic layout of how to install the rr10 bomber servo winch plate. You will need a 1/8" drill bit and basic tools. Install the plate and install the two m3x10mm screws in the mounts under the battery tray. For the front two m3x16mm screws, mark and remove bumper. (Pencil shows up well on the black plastic). Drill the two marked holes out. Re-install the bumper. With the m3x16mm spacers and m3 lock nuts, bolt the plate to the bumper. DO NOT OVER TIGHTEN BOLTS! Spacers are only needed for those that are using the stock servo mount. Mount up you fairlead hawse and choice of servo winch.
- Stainless plate
- (2) 10mm stainless screws
- (2) 16mm stainless screws
- (2) lock nuts
- (4) spacers
This product was added to our catalog on January 16, 2018.