Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio

Traxxas
TRA82016-4
Note: Manufacturer does not allow using discount coupons
Low Price: $369.99
 
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours
FREE Shipping Eligible!
This item is eligible for Super Saver Shipping Learn More
This item earns up to 370 VIP Reward Points Learn More

The Traxxas TRX-4 Scale and Trail Crawler chassis kit offers the same innovative features as the RTR vehicle, combined with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road.

Easy to Follow Assembly Instructions
The TRX-4 Chassis Kit isn’t just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit.

Features:

  • Easy to follow full-color assembly manual
  • Trail-tuned XL-5 HV Waterproof Electronic Speed Control
  • Powerful Titan™ 21T reverse rotation motor
  • Portal Axles
  • Rigid Steel Frame
  • Full-time shaft driven 4-wheel drive
  • Tough 6mm stub axles
  • Steel front CV driveshafts
  • Hardened steel rear axle shafts
  • Remote locking steel gear differentials with cable-actuation
  • Steel gear transfer case
  • Innovative Battery Compartments
  • Secondary battery mount over front axle for forward weight bias
  • Two speed high/low range transmission with remote shifting
  • Superior 45° steering angle
  • Front — 3 link with panhard
  • Rear — Triangulated 4 link
  • Pre-assembled heavy-duty rod ends with steel hollow balls
  • 5mm diameter steel link rods with 4mm threaded ends
  • Coilover GTS shocks exclusive to TRX-4 chassis
  • Silver-anodized aluminum bodies
  • Threaded bodies with collars easily adjust ride height
  • Silky smooth damping for the toughest trails
  • O-ring cap seal and dual X-ring shaft seals
  • Shock oil included in kit
  • 1.9” Canyon Trail tires with trail-tuned foam inserts
  • Tough black scale wheels
  • Trail tuned S1 rubber compound
  • 12mm steel hex
  • Tire glue required
  • TQi™ 2.4GHz 4-channel transmitter
  • Patented O-Ring sealed watertight receiver box keeps the micro receiver dry
  • Sealed Ball Bearings
  • Hex hardware with rust-resistant black oxide coating

Specifications:
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Approach Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Wheel Hex: 12mm
Speed Control: XL-5™ HV
Motor (electric): Titan® 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Gear Pitch: 32
Brake Type: Electronic “Hill Hold”
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H

Includes:

  • Unassembled TRX-4 Chassis Kit
  • TQi™ 2.4GHz 4-channel radio system with 4 servos
  • XL-5 HV waterproof ESC
  • Titan® 21T 550 motor
  • Full-color step-by-step assembly manual
Needed to Complete:
  • TRX-4 compatible body (313mm wheelbase)
  • (4) AA batteries for transmitter
  • 6 or 7 cell NiMH or 2s or 3s LiPo battery pack with Traxxas High-Current Connector
  • Battery charger
  • Metric hex drivers (1.5mm, 2.0mm, 2.5mm)
  • Basic hand tools (screwdrivers, needle nose pliers)
  • CA glue
  • Safety glasses

This product was added to our catalog on February 27, 2018.

Nick Brogie
Verified Owner
Monday, May 28 2018 (3 weeks ago)
Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit
Built it bashed it all stock for now but I must say it was fun to build except for one gear in the trans needed to be dremeled out for a bearing to fit in it other than that its a nice kit
Everything went together well directions are good
The shocks are great when built properly some of the smoothest ive ever had even over my prolines
I'm running a scx10.2 cherokee body and it fits perfectly
Id recommend this kit to intermediate builders as the directions can be confusing)
Steve Novak
Friday, Apr 6 2018 (2 months ago)
Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit
Found it a fun assembly and a good base to start adding all the optional upgraded HD parts. VERY easy to follow instructions and everything fit perfect and I had zero problems. Took around 5-6 hours total to assemble. It fits the Bronco body perfect and easy enough to modify to fit the Defender and Tactical bodies.

The real question would be, if I had it to do over would I do it again ? That would be a big yes.

I DID do my "homework" on this kit before I bought it. Watched a full build on U-Tube along with reading other reviews on the kit. The 24t output gear and the bearing DID fit on mine (although I purchase an extra gear just incase) and added it to my spare parts bin after not needing it. Also added the all metal gear upgrade kit to the transmission.

IF I was going to complain about anything, I would have liked Traxxas to have added an extra tube of HD grease for the gears. Didn't quite agree with just a dab on each gear. I used a compatible marine grease that was safe for plastic and has a wide temperature range from below zero to over 100 degree F.)
chadd steimel
Friday, Apr 6 2018 (2 months ago)
Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit
I got this kit, and couldn't get past bag one, (dead serious on my life, bag ONE!) the 24t output gear and the bearing DO NOT fit, which I guess is a common problem with this kit. So a roll of bearings ($10)and the ridiculous $14 gear, and after a week, I can start again, but wait...One of the tiny servos wasn't centered.... So I moved it back, WASTED the servo with very little force on the servo "saver". So now another week of waiting while this POS lays in parts.... Then I get to fix that with MORE money spent, only to find out that the kit version is DIFFERENT than the RTR. The shock towers are integrated into the wheel wells forcing you to use them or seriously cut them up to fit your body, so then I had to spend MORE money to get shock towers..... All in all, the kit version SUCKS!! Like all things Traxxas, make sure you get it RTR and "working" already, otherwise the money you THOUGHT you saved was in vain. I have said it time and time again, I will never buy Traxx-Ass again. Then when I call Traxxas to get replacements, they say, "oh that's no big deal" So I said, "not making it past bag one, and this kit sitting here in a box week after week, brand new and doesn't work out of the box. that IS A BIG DEAL". Get it RTR, the only thing it doesn't come with is a body. You will be much better off with it pre-built.)
Sal Sorrentino
Thursday, Apr 5 2018 (2 months ago)
Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit
This kit is shit
Everything is plastic
And the electronic are all terrible
The shcoks on it are so bad
Imwas severly disaponted i wish that traxas would put some passion in there cars
Nothing fit togther properly
I had to dremel out the servo mount becuase it wouldnt fit)