Thunder Tiger Mini Titan E325 V2 Electric 3D Helicopter Kit w/Ripper Motor & ACE 40A ESC

Thunder Tiger
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Thunder Tiger Mini Titan E325 V2 Electric 3D Helicopter Kit. This kit includes a Thunder Tiger Ripper OBL 29/37-10H 3700kV motor, ACE BLC-40 40 Amp ESC and Carbon Main Blades. This is the kit version of the helicopter, and requires assembly. Performance has gone ballistic with the latest Mini Titan E325 V2. Tons of impressive features have been incorporated to create the ultimate 450-Class 3D machine: lightweight Carbon/Aluminum main frame, full metal rotor head, lightweight 3D paddles, carbon fin, reinforced main shaft and a totally-redesigned fiberglass canopy!

The V2 also comes equipped with radically longer rotor grips & rigid hub for generating additional lift and awesome response, even when flown under standard-size blades. To top it off, roll rate is exponentially faster than any other 450-size heli thanks to a lower blade-to-ground height, a high-positioned battery tray & motor mount design keeping CG much closer to the main rotor disc. “Pendulum” effect is reduced to a minimum making the V2 is much more stable platform. The longer grips & hub generates more lift and provides extremely crisp & accurate pitch response.

With the Mini Titan E325 V2, 3D pilots can finally get their hands on an aggressive performer, with the best power-to-weight & the widest adjustable mixing ratio in its class.

  • Includes a High Performance 3700KV Brushless Motor & 40A ESC as Standard Equipment
  • 2-piece Reinforced Carbon Main Frame (1.5mm)
  • Super Rigid Carbon Frame & CNC Machined Aluminum Construction
  • Slim & Aerodynamic Pre-Painted Fiberglass Canopy
  • One-piece Machined Aluminum Mast Block/Servo Mount
  • Adjustable Bell-Hiller Mixing Ratio
  • Equipped With Lightweight 4.4 Gram 3D Paddles
  • Integrated One-piece High-positioned Battery & ESC Tray,
  • Metal & Carbon Light Tail Case/ Metal Grips
  • One-piece Low Gravity Molded Skid With Integrated Antenna Holder
  • Canopy with Integrated Heat Sink For Efficient Thermal Dissipation
  • Exclusive Receiver Tray

Full Length of Fuselage: 640mm (25.19")
Full Width of Fuselage: 230mm (8.79")
Total Height: 209mm (8.2")
Main Rotor Diameter: 745mm (28.46")
Tail Rotor Diameter: 156mm (6.14")
Gear Ratio: 1:11.5:4.4
Full Equipped Weight: approx. 800g (28.35oz)

Needed to Complete:

  • 6 Channel Helicopter Transmitter & Receiver
  • 4 Micro Servos (3 Control Surface, 1 Rudder)
  • Heading Lock Gyro
  • 3S LiPo Battery & Charger
  • Various Tools & Adhesives

This product was added to our catalog on January 3, 2011.