Tekno RC V4 Brushless Kit (Associated RC8T-SC8/42mm Motors)
This is the Tekno RC V4 Brushless Kit, and is intended for use with the Associated RC8T and SC8 1/8 scale trucks. Tekno RC brought you the first 'electric specific' 1/8th chassis, the first 1/8th slipper system, and the strongest most secure motor mounting system available anywhere. The V4 kit represents state of the art in 1/8th Electric Offroad. With 50/50 Left/Right balance and 50/50 Front/Rear balance, no other platform comes close. Throw the lowest overall CG available into the mix and you have a package that outperforms the competition. This translates to a car that is more consistent, uses less power, and is easier to drive faster.
NOTE: This Tekno V4 truggy kit (TKR4506) no longer includes a rear chassis brace. This is a Losi part (LOSA4414) and is required for operation of the vehicle with the Tekno kit installed. Running without the brace will compromise the durability of the chassis.
All New Chassis Layout: To start, the center differential was moved towards the rear of the vehicle to make better use of the space available on the chassis. As a result, the battery is tucked as close to center, as far forward, and as low as possible. This allowed the center driveline to be straightened for most of the popular platforms providing improved efficiency, increased durability, and less heat. The motor is turned around and moved forward for better steering response while balancing perfectly with the battery Left to Right as well as Front to Rear. Lighter components such as the ESC and optional brake servo are placed low and towards the rear.
New Radio Box, ESC Tray, and Transponder Mount: The V4 radio box is a very versatile little box. Plenty of room for today's most popular receivers and a modular design allows it to be used on both the V3 and V4 chassis, as well as DIY projects requiring a compact receiver box. It can be mounted on any V3 chassis where the mechanical brake servo would normally be mounted. On the V4 chassis, it can be mounted along side the steering servo in front or in back where the mechanical brake servo would go - it's your choice. An integrated antenna mount completes the receiver box package.
The new ESC Tray is lighter and mounts lower to the chassis than the V3. The softer plastic material safely cushions the ESC and sits a mere 7mm off the surface of the chassis. A new transponder mount makes transponder placement an easy task while remaining lightweight, versatile and durable.
Battery Tray: The V4 truggy kits include a longer 165x52mm tray for use with bigger batteries that are better suited for truggy applications. It is also sunken in to the chassis for lower CG and uses the proven and durable 3-strap system that ensures your battery doesn't move during use. The tray is secured with countersunk screws and has a compact footprint that can also be used for those DIY projects.
Power Delivery Options: No other platform on the market provides as many useful power delivery options
- Direct Drive (standard pinion) + Motor Brakes
- Direct Drive (long shank pinion) + Motor Brakes (moves the motor forward for better steering response)
- Direct Drive (long shank pinion) + Mechanical Brakes
- Traktion Drive + Motor Brakes
- Traktion Drive + Mechanical Brakes
- Elektri-Clutch + Mechanical Brakes
- Hard Anodized CNC Machined 7075 Aluminum Chassis
- Black Anodized CNC Machined 6061 Aluminum Motor Mount (42mm, for Castle, Tekin)
- Hardened Steel Front and Rear Center Driveshafts
- Battery Tray
- Battery Straps
- Receiver Box
- ESC Tray
- Mud Guards
- Servo Mounts
- Transponder Mount
- Truggy kits include longer battery tray. Rear brace (LOSA4414) is required to complete conversion.
This product was added to our catalog on January 7, 2011.