Tekno RC Sway Bar Kit (Revo)
TKR1013
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Tekno RC Sway Bar Kit for the Traxxas REVO 2.5/3.3 Monster Truck. Our new sway bar kit for the REVO will enhance handling on and off the track. Our compact inboard design is lightweight, efficient, and tunable.
Features
Contents:
(4) custom sway bar mounts
(2) 1.8mm sway bars
(2) 2.0mm sway bars
(2) 2.2mm sway bars
(4) 50mm turnbuckles
(8) plastic rod ends
(4) flanged pivot balls
(4) stabilizer pivot balls
(4) M3x40mm socket screws
(4) M3x25mm button screws
(2) M3x6mm button screws
(4) M3 washers
(8) M3x4mm setscrews
Detailed instructions
Note: Clearance is guaranteed for TRX 2.5R and TRX 3.3 engines and stock or Resonator exhaust pipes. We have heard about some minor clearance issues with OS .18 and Picco .26 Max engine heads.
Features
- Truly Bolt-on installation - no mods required. No drilling through your rocker arms
- Lots of tuning options - includes 3 sets of bars
- Compact and lightweight - by far the cleanest looking sway bar solution
- Works with any chassis, any suspension arms (stock or aftermarket)
Contents:
(4) custom sway bar mounts
(2) 1.8mm sway bars
(2) 2.0mm sway bars
(2) 2.2mm sway bars
(4) 50mm turnbuckles
(8) plastic rod ends
(4) flanged pivot balls
(4) stabilizer pivot balls
(4) M3x40mm socket screws
(4) M3x25mm button screws
(2) M3x6mm button screws
(4) M3 washers
(8) M3x4mm setscrews
Detailed instructions
Note: Clearance is guaranteed for TRX 2.5R and TRX 3.3 engines and stock or Resonator exhaust pipes. We have heard about some minor clearance issues with OS .18 and Picco .26 Max engine heads.
This product was added to our catalog on June 3, 2009
Devin
Verified Owner
Saturday, Jul 27 2013 (about 10 years ago)
Tekno RC Sway Bar Kit (Revo)
I wasn't sure if they would work for an E-Revo, so I emailed Tekno they responded quickly and said they will work. I got it in and one of the turnbuckles was missing threads on one end. Contacted Tekno again they sent me some right away with no questions asked. When I finally had a chance to run with them on the handling was improved drastically. They are easy to install with no interference issues at all. I also use an Outerwears Shroud I was concerned that there would not be enough room for the cover but it still fit. I still give it a 5 even with the bad turnbuckle, because there tech support was great, and they perform better than I expected.
Anonymous
Verified Owner
Sunday, Apr 22 2012 (about 12 years ago)
Tekno RC Sway Bar Kit (Revo)
Best sway bar kit for Revo out there, no drilling or cutting, rear mounts the same way as the front, with some after market engines you might have to bend the other side of the rear bar. I noticed that the rear turnbuckles don't fit perfectly to the rear long travel rockers, but 2 thin suspension shims and problem solved.