Tekin RS GEN 2 SPEC Sensored Brushless ESC/Gen2 Motor Combo (13.5T RPM)

This is the Tekin RS GEN 2 SPEC Sensored Brushless ESC/Gen2 Motor Combo, with an included 13.5 Turn RPM Gen2 Motor. The RS GEN2 SPEC was developed specifically for Spec class racing, delivering professional performance at an affordable price. Rated for 13.5 turn motors and higher, the GEN2 is the perfect ESC for racers of all calibers, and all classes. This ESC has no timing or boost features, offering true ROAR Spec mode only. The RS SPEC brings racer-friendly tuning and flawless operation to the world of Spec racing. The RS GEN2 SPEC features an EZ Access Port for HotWire communication and Datalogging capabilities in a small sized package. Couple the RS GEN2 SPEC with a Redline GEN2 brushless motor for the ultimate Spec racing package.

Tekin's Gen2 series motors carry forward engineering principles and performance benchmarks set by the Tekin Redline name. The Gen2 Redline Sensored Motor incorporates the latest technology advancements in brushless motor design and manufacturing, giving you the torque and RPM you want every time you pull the trigger. On Road or Off, Tekin's Gen2 Sensored motors give you an edge over your competition and deliver smooth power throughout the entire RPM range. 

• RS GEN2 SPEC ESC:
• ROAR Spec Mode only, no Timing features
• Ultra-smooth and Precise Throttle and Braking Control
• Compatible with Sensored/Sensorless Brushless and Brushed Motors
• Easily Access Programming, Anywhere, Anytime
• Datalogging Capability
• EZ Access HotWire Programming Port
• HotWire PC Interface for Advanced Programming and Updating
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• HDAC: High Density Copper PCB's
• Sensor Plug for Precise Commutation with all Motors
• Gold-plated Solder Posts for Easy Wire Replacement
• Self Test Diagnostics and Factory Reset
• Pit Tune Mode
• DGF2: Digital Glitch Filtering V2
• QuickTune™ Programming
• One-Touch Radio Calibration
• Gen2 Motor:
• CNC Machined T 6061 Billet Aluminum Heatsink Can
• Neodymium Sintered Magnet
• Precision Engineered for Maximum Energy Conversion
• High Purity Copper Windings Maximize Conductivity
• Low Resistance, High Power Solder Tabs
• Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
• Anodized Endbell plates maximize corrosion and wear resistance
• High RPM precision bearings
• Rebuildable Design
• Solderless Sensor PCB replacement
• Adjustable Timing

ESC Programming Features:

• Drag Brake (13 steps)
• Brake / Reverse Strength (13 steps)
• Current Limiter (none + 12 steps)
• Neutral Width (13 steps)
• Adjustable Throttle and Brake Minimums
• Custom Throttle Curves
• Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
• Voltage Cutoffs (none, 2S, 3S, Custom)
• ROAR Race Spec "Blinky" Mode
• Save, Load and Share custom ESC setup files*
• Save, Load and Share Data Log files*
• Extensive Tuning via Tekin HotWire PC Interface

*NOTE: Requires HotWire - Sold Separately

Specifications:

• RS GEN2 SPEC ESC:
• Controls: Forward/Brake/Reverse
• Input Voltage: 4-7 Cells, 2S Lipo
• BEC: 6.0v 3.7amps
• Motor Limit Brushless Mode: 13.5 Turn, 540 2-pole (36mm)
• Motor Limit Brushed Fwd Only Mode: 20 Turn Silver Can
• Motor Limit Brushed Fwd/Rev Mode: 20 Turn Silver Can
• Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
• Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
• Dimensions: 1.0x1.3x.51" (25.4x33x12.9mm)
• Weight: .80oz / 22.5g
• Motor:
• Turn: 13.5
• kV: 3600
  
• Rotor: 12.3mm
• Weight: 6.3oz (180g)
• Shaft Dimensions: 3.2x15.3mm
• Motor Diameter: 35.85mm/1.40"
• Motor Length: 51.8mm/2.03"
• Bearing Dimensions:
• Front: 4x13x5mm
• Rear: 1/8x3/8x5/32"

This product was added to our catalog on December 17, 2013