Team BlackSheep TBS Vendetta 240 FPV Racing Drone

Introducing the Vendetta 240 FPV Racing Drone from Team BlackSheep! With the ever expanding technology within the FPV Drone market, TBS has hand picked each of these components included in the Vendetta to provide maximum performance at a cost effective value packed package. Features such as a full carbon fiber monocoque, modular quick swap arms, solder-free electronics all in a almost RTF 240 size FPV Racing Drone suited for 5" props.

Carbon Fiber Throughout
All structural parts on the TBS Vendetta are made out of custom carbon fiber layup. The arms are made from flat 3.5mm thick carbon fiber plates, machined to precise standards on a 4-axis CNC machine, fully chamfered to prevent delamination. The body is a pure work of art, which starts its life as a hand molded tubular 2mm carbon fiber master. It is trimmed down by a 4-axis CNC machine to save weight. Smooth and rounded edges in the CNC cuts are manufactured for an additional flair from the TBS factory. The matte finish is sand blasted, for a final small but desired detail.

Tight Integration Featuring Modular Design
The entire Vendetta is built around the idea of countless self-contained parts working together hand in hand for a unified user experience. Starting from the TBS ZeroZero FPV camera, to the TBS Powercube and TBS Core Pro, everything is repairable without a soldering iron, and with just two tools. This does not prevent you from configuring all tuning parameters via the built-in OSD, to changing vTX channels or power levels.

Box to Air in the Blink of an Eye
The TBS Vendetta comes pre-tuned, and the R/C Calibration Wizard takes you through the setup steps. Just strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls (both R/C receiver, goggles and FPV video receivers are sold separately). The arms arrive in detached state to allow quick access to the R/C receiver bay the first time.

Built to Grow
From the structural rigidity of the frame, to the over-powered ESCs, everything has been developed with your progress as a pilot in mind. A step to 6S with bigger motors to gain ridiculous power-to-weight ratios, custom arms for higher efficiency motors and props, or simply a different motor setup to suit your tastes are easily possible, thanks to the MT30 connectors and the quick swap arms. You can even carry different pairs of arms with unique motor and props combos installed for every occasion, and mount what you fancy!

 Features

• 240-sized ARTF FPV Racer
• TBS Triumph Antenna
• TBS Core Pro OSD
• TBS Unify Pro vTX
  
• Quick-replace 3.5mm carbon fiber arms, MT30 connectors
• Cobra CM2204/2300kV Motors
• HQ 5x4x3 Tri-Blade Props
• TBS PowerCube featuring F3 processor
• 2-6S capable Bulletproof 30/50A ESCs
• Compatible with PPM, SBUS, XBUS, Spektrum R/C systems
• Fully configurable via OSD, no PC required
• GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations
• Lost model alarm
• 410g weight without Battery or HD camera

This product was added to our catalog on June 6, 2016