Team Associated TC6.2 Factory Team 1/10 Electric Touring Car Kit

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Low Price: $419.99
Discontinued Online
This is the Team Associated TC6.2 Factory Team 1/10 Electric Touring Car Kit. The successful R.O.A.R. and B.R.C.A. national championship-winning TC6 has been refined with a variety of performance-enhancing upgrades that take the TC6 platform to the next level. The RC10TC6.2 Factory Team kit features an updated bulkhead, top plate, and chassis configuration that will allow the user to optimize the amount of flex in the chassis by disconnecting the drivetrain bulkheads and suspension mounting systems. This arrangement allows the user to tune the flex through the entire length of chassis, giving maximum, yet predictable grip on any track surface. At only 88mm wide and 2.25mm thick, the TC6.2 carbon fiber chassis remains very narrow, resulting in reduced drag during the hardest cornering.
The TC6.2 retains the H.D.R.C. (High Definition Roll Control) system that allows the user to adjust and control roll stiffness using the two wires that mount into the sides of an aluminum center member and link to the suspension arms. The aluminum center member rolls on a bearing surface to reduce friction and provides ultra-precise movement. The independent arm mount system features interchangeable toe inserts and pivot ball joints, allowing the racer to dial-in the suspension on an even more granular level. Optimized ballstud positions are connected with eyelet ball cups and blue titanium turnbuckles, adding up to an easier-to-tune platform with even more precise suspension adjustments than before.

The included Factory Team VCS3 shocks feature hard-anodized threaded bodies with bottom-loaded seals for super smooth operation. TiN-coated shock shafts and an increased stroke, help to deliver improved traction. The TC6.2 incorporates a floating servo mount that not only improves steering control but also offers an increased area for mounting the ESC and receiver. The floating servo ties directly into a dual bellcrank steering system with optimized Ackermann and steering speed. The rear differential is a lightweight gear type configuration for maximum performance, adjustability, and low maintenance, while the front spool features replaceable composite outdrives with the performance of low-friction CVA blades to allow for free axle movement. The TC6.2 is rounded out with 22 precision ball bearings, Team Associated's TC6.2 has what it takes to keep you out in front and ahead of the pack in today's highly competitive touring car races.

RC10TC6.2 Factory Team Features:
  • Updated bulkheads and arm mount system (below right) for precise suspension adjustments and consistent flex through the entire length of the chassis
  • Optimized dual bellcrank ball bearing steering system with adjustable Ackermann and improved steering rates
  • Floating servo mount fits most popular servo sizes and allows for a tweak free assembly with equal chassis flex in both directions
  • Narrow 2.25mm graphite laminate chassis provides optimized flex characteristics and minimizes possible dragging at maximum chassis roll angles
  • Floating spur gear mount design (below left) allows for more flex through the rear of chassis to increase traction in all conditions
  • Ball stud positions are optimized for fine adjustments of roll center and camber gain
  • Spur gear and top plate have been lowered to allow for more chassis flex and increased traction in any condition
  • Lightweight rear gear diff with hard anodized aluminum outdrives, and front spool with replaceable composite outdrives
  • VCS3 shock with hard anodized threaded shock bodies
  • Titanium turnbuckles with ballcup eyelets for easy access to ball stud
  • 22 precision ball bearings
  • Cross-compatibility with all TC6.1 suspension components
Power Source:
Terrain: On-Road
Body Style: Touring Car
Scale Size: 1:10 Scale
Assembly Level: Kit
Length: 381mm (15in)
Width: 190mm (7.48in)
Wheelbase: 255mm (10.04in)
Weight: 1375g (3.03lbs)
Internal Gear Ratio: 2.0:1
Drive: 4WD

Needed to Complete:
  • 1/10 scale electric motor & electronic speed control
  • 7.4V LiPo or 6.0V LiFe battery
  • Battery charger compatible with chosen battery chemistry
  • 2-channel surface transmitter, and its batteries
  • 2-channel receiver
  • Steering servo
  • 1/10 scale (190mm) polycarbonate touring car body
  • Polycarbonate-specific spray paint for body
  • 1/10 scale rubber or foam touring car tires

This product was added to our catalog on December 30, 2013.