The Team Associated Reflex DB10 RTR is a Ready-To-Run RC electric desert buggy based on the 9-time R.O.A.R. Short Course National Championship-winning SC10 truck. It features some major upgrades not normally found in RTRs: a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro which allows vehicle stability to be adjusted to flow with the terrain. A Reedy metal-gear digital high-torque servo and LED lights front and rear round out the Reflex DB10!
The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox now comes with a heavy-duty sealed-gear differential and externally adjustable V2 slipper clutch. 81mm CVA driveshafts increase traction and chassis support. Hex-drive, realistic off road wheels and tires, to keep the desert buggy gripping the ground, come standard in the Reflex DB10.
Features:
- Based on the 9-time R.O.A.R. National Champion short-course race truck platform, with rear motor design
- 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
- High-torque, metal-gear Reedy servo with spring-style servo saver
- Powerful Reedy 3300kV brushless motor
- Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
- Factory-finished off road desert buggy body
- Realistic Method Wheels with 12mm front and rear hex-drive nuts
- Four integrated LED's included, 2 front, 2 rear
- Water-resistant enclosed receiver box
- Aluminum 12mm big bore coil-over shock absorbers
- 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
- Durable and lightweight aluminum top shaft
- Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
- Metric hardware throughout
- 14 precision rubber-sealed ball bearings
- Durable front and rear body mounts
- Rugged steel turnbuckles for adjustable camber and front toe-in
- Fully adjustable suspension geometry
- Vertical ball ends for roll center adjustments, front and rear
- Rear CVA drive shafts for more reliability
- Many Factory Team options already available!
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 481mm (18.94in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1855g (4.09lbs)
Drive: 2WD
Needed to Complete:
- (4) AA batteries for transmitter
- NiMH or LiPo battery with High Current T-Plug
- Charger for battery used
This product was added to our catalog on February 14, 2018
CONS: The gear mesh was set perfectly out of the box, but tightened up after my first good chassis slap. A quick fix and no harm done. Also, the wheels/tires are great on the street, but had problems in loose sandy dirt. The air hole is too big, allowing dirt to get in, and they got a bit of a wobble after my first bash. They still worked well enough for me to have a great time, but I upgraded to Proline Badlands with Renegade wheels and no more wobble or sand fill. Lastly, an m3 nut worked it’s way loose from the steering turnbuckle and got lost, ending my fun for the day, but later fixed with a bit of loctite.
Overall, it handles great, runs cool, and looks awesome. I may get another one with the paddle tires in the future!
Also, if this is your first rc, don’t get the version with the battery/charger for $60 more. Get a decent 2s 5200mah battery($30 and longer run time than the 3300mah this comes with) and the Dynamite Prophet Sport mini charger($30). Which is the same one this comes with. More bang for the same money.