Spektrum NX10 10-Channel DSMX Transmitter with AR10400T
This is the Spektrum NX10 10-Channel DSMX Transmitter with AR10400T PowerSafe Receiver. This 10-channel combo is packed with Spektrum's most advanced features and innovations to provide a level of ease, efficiency and performance. With 10-channel versatility allows you to operate your models to their full potential and fly complex aircraft such as the EDF or big scale airplanes such as the Carbon Cub. Equipped with Spektrum PowerSafe for models using multiple servos and accessories that draw excess current such as those found on big scale airplanes and jet models.
NOTE: Not compatible with Spektrum AS3000 Stabilization Module and DSM2 AIRMOD JR Module
Features:
- NX10 Transmitter:
- Backlit 3.2", 320x240 display screen with multiple color palette choices and user customizable colors
- Wi-Fi connectivity for easy product registration and firmware updates
- Superb ergonomics including smooth Hall-effect sensor gimbals
- Exclusive Spektrum Airware programming software
- Proven Spektrum DSMX 2.4GHz Frequency-agile technology
- Smart Technology compatibility out of the box
- 3.7V 6000mAh 1S Lithium-Ion transmitter battery and a magnetic USB Cable and Micro USB Adapter for convenient USB charging
- Integrated serial port provides power and support for 3rd party modules
- Airplane, sailplane, multi-rotor and helicopter programming
- 250 model memory
- Model templates available for BNF aircrafts
- AR10400T Receiver:
- Patented PowerSafe™ redundancy system with dual battery input ports with IC3 connectors. Perfect for power hungry aircraft and high current servo applications drawing up to 35A (50A max burst)
- Forward programming allows for easy adjustments to failsafe settings, servo frame rate settings and more
- Micro USB port for easy product registration and firmware updates
- 12V capable for use with 12 volt servo applications (must be activated via Forward Programming)
- Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed
- Integrated Black Box telemetry log saves all telemetry data automatically when an optional (micro SD card - Sold Separately) is installed
- Integrated status LED provides helpful information during start up, warnings and mode indicators
- SRXL2 connectivity for easy, one wire connection to supported devices
- Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need for modules, links and wires
- Receiver pack energy voltage sensor and flight log telemetry data available without the need for additional sensors
- Full range telemetry with an integrated barometer to provide altitude and vario telemetry without additional modules
- Included Soft Switch allows servo current to be routed around the switch, in case the switch fails for any reason, power to the system will not be interrupted.
- Rubber grommet hard mounts and minimalistic labeling helps produce the cleanest model setups
- Capable of high-speed 11ms frame rates
- Binding is easier than ever with four options to initiate the binding process
- Integrated telemetry with built-in ports for RPM, flight pack voltage, temperature sensors and X-bus for telemetry sensor expansion
- Compatible with all Spektrum DSM2 and DSMX transmitters
Specifications:
- Band: 2.4GHz
- Input Voltage: 3.7V
- Resolution: 2048
- Programmable: Yes
- SD Card/Airware Capable: Yes
- Frame Rate: 11ms, 22ms
- Model Memory: 250 models
- Modulation: DSMX
- Channels: 10-Ch
- Transmitter (Tx) Battery Type: 1S3P 6000mAh LiIon
Includes:
- (1) Spektrum NX10 10-Channel DSMX Transmitter with AR10400T PowerSafe Receiver
- (1) 3.7V Battery
- (1) Charger for battery
- (1) Manual
This product was added to our catalog on March 17, 2023
