Speed Passion Reventon Stock Club Race ESC/V3.0 Motor Combo (17.5R) Fixed Timing
This is the Speed Passion Reventon Stock Club Race Sensored ESC and V3.0 17.5 Turn Locked Endbell Motor Combo. The Reventon Stock Club Race ESC has been accepted around the world as an ESC that will redefine club and spec racing. The non-adjustable software proves to the world that the Reventon Stock Club Race ESC is the only ESC that’s needed for any type of racing without spending valuable on-track time for inspections. The built in no timing software provides equal performance and low costs which are ideal to grow new classes and attract new racers. The full size heatsink design provides greater heat dissipation working with the high speed fan results in cooler ESC temperatures when racing at the limit.
The V3.0 Competition Series Motors took the World Championship by the storm in 2010 and have earned many other records throughout the world. This 2,200kV motor has been proven to meet the demands of the racing environment and features a locked endbell with fixed timing, making it an excellent choice as a spec motor for 17.5 spec class point series events.
- Supports up to 9.5T motors with 2 cell lipo
- Adjustable voltage cut off
- DRRS throttle profile setting
- Optional Wifi/Bluetooth connection
- Optional on-board voltage reading
- Optional ESC temperature reading
- ESC parameter adjustments via the one touch button
- Redesigned front plate and rear motor end bell: Re-designed and improved front plate and rear end bell material is ready for the most extreme conditions.
- Reinforced timing sensor unit: This improved sensor unit provides a stronger sensor holding capability to withstand the most extreme racing conditions and helps to improve reliability.
- Locked End Bell: The locked end bell prevents timing changes and helps to encourage fair competition, making this motor a great choice as a spec motor for club level point series events.
Current (Continuous/Burst): 40A/250A
Resistance: 0.0005 ohm
Battery: 4-9 Cell Nickle/2 Cell LiPo/2-3 Cell LiFe
BEC Output: 6.0V/BEC 2A
ESC Type: Sensored/Sensorless
Motor Type: Sensored/Sensorless
Dimensions: 33x33x19mm (LxWxH)
Motor Limit: 9.5T Max @ 7.2/7.4V
ESC Fan: 25mm
Supports Wi-Fi Module Software: Yes (optional WiFi Module sold separately
Supports Smart LED Program Card: Yes (optional Smart LED Program card sold separately)
Supports 2.4G held-set for program setting: No
Supports Bluetooth Module Setting: Yes (optional Bluetooth Module sold separately
Racing Program Setting: Stock 0 "Zero Timing Software"
EFRA/ROAR/IFMAR Spec: Yes
Adjustable Timing: No - Fixed Endbell (Timing fixed @ +10°)
Rotor: No Fan
Input Voltage: 4-8 Cell NiMH, 2S LiPo
Max Amps: 16A
Shaft Diameter: 3.175mm
Hand Wound: Yes
Thermal Protection: Yes
This product was added to our catalog on May 4, 2016.