120A, Full Aluminum Case, Wifi Programmable using your Smartphone
This is the SkyRC TS120, a 120A Sensored Brushless ESC intended for 1/10 scale use. The TS120 features a full aluminum case, cooling fan, build-in power switch, 6V/3A BEC and 2S or 3S LiPo compatibility. For 1/10 on-road use, the ESC features a 3.5T motor limit; for 1/10 off-road use, the ESC features a 5.5T motor limit.
Precise Programming
The TS120 can be programmed using three different solutions: the LCD 6-in-1 Program Box, SkyLink PC Connection or with the WiFi Module for use with your iOS or Android device. The LCD Program Box is small enough to fit in your pit bag and also doubles as your PC Connection if ever needed, as well as being an Input PPM Signal Monitor, Servo Tester, Motor kV/RPM Tester and LiPo Battery Monitor.
WiFi Module Programming
The WiFi Module is the most convenient of the three programming solutions and offers a full user interface right on your iOS or Android device using the SkyRC ESC Link App. The TS120 features a dedicated programming socket for the WiFi Module, for quick adjustments, or you can also leave the WiFi module mounted in your RC vehicle for any-time adjustments at the touch of a button. Forget about the days of using your sensor cables to program.
Programming devices are not included and are sold separately.
- WiFi Module (SKY-SK-600075)
- 6-in-1 Program Box (SKY-SK-600046)
Features:
- Low Voltage Protection
- Motor & ESC Overheat Protection
- Signal Loss Protection
- 2-3S Compatibility
- Full Aluminum Case
- Sensored or Sensorless Use
- Down to 3.5T Motor Limit
- 6V/3A BEC
- WiFi Smartphone Programming
Specifications:
- Weight: 45g (without wire)
- Dimensions (LxWxH): 39x31x19mm (without fan attached)
- Constant Current: 120A
- Burst Current: 760A
- Motor Compatible: Brushless Sensor & Sensorless ESC
- Car Compatible:
- 1/10 and 1/12 On-Road & Off-Road
- 1/10 and 1/8 Crawlers
- Motor Limits:
- 1/10 On-Road:
- 2S LiPo (6-cell NiMH): 3.5T
- 3S LiPo (9-cell NiMH): 5.5T
- 1/10 Off-Road:
- 2S LiPo (6-cell NiMH): 5.5T
- 3S LiPo (9-cell NiMH): 8.5T
- Resistance: 0.0003ohm
- Battery Cell Count: 2-3S LiPo or 4 to 9-cell NiMH
- BEC Output: 6V@3A
- Fan: 8V@0.2A , MAX 12.6V
- Programming: with Wifi Module (SKY-SK-600075) or Program Box (SKY-SK-600046)
This product was added to our catalog on January 4, 2016
The only issue i've had is with the wifi module being laggy to sync the esc and app. With my older plastic case TS120 it used the bluetooth module and it synced in seconds, but the bluetooth and wifi modules use separate apps. The wifi app is new and may need an update. But once it syncs, it all works fine and is a very cool way to program and to see so many settings at once on your phone. Would recommend.