Sky Hero Anakin BNF FPV Racer w/CC3D Controller
The Sky Hero Anakin FPV Racer is Sky-Hero's fastest aircraft and is the ideal FPV racer for pilots that want more than just horizontally adjustable arms. Developed specifically for FPV racing, Anakin features a unique adjustable arm system that allows users to alter the flight characteristics of the aircraft for a flight experience that is dramatically different than anything you have flown in the past.
By adding the optional interchangeable side frames (not included), you can change not only the look of the frame, but also the motor positions for almost infinite fine tuning of the flight characteristics. But even with all this adjustability, Anakin is suitable for both expert and beginner pilots and gives anyone the opportunity to fly within minutes. Plus, every bind ready Anakin is pre-assembled and factory tested, ensuring the product you receive is ready to fly. Just add your battery and radio and you are ready to race!
- Arm Positions
- High c.g. position (Front tube low + rear tube low)
- High ground clearance
- More agressive reactions
- Better turn in
- Neutral turn out
- Low c.g. position (Front tube up + rear tube up)
- More stable forward flight
- Stable turn out
- Slower turn in
- Neutral C.G. position (Front tube down + rear tube up)
- 15° angle for mobius camera
- +15° to FPV camera
- Lower drag
- Best overall racing setup
- Highest speed
- Most neutral reactions
- Feels more locked in
- Motor Angle: Optional side frames are required, not included.
- 0° = Neutral reaction, more drag, less speed
- 10° = Yaw efficiency decrease, less drag, more speed and flight time
- Camera Angle:
- 10° = Flat vision, ideal to start and learn
- 20° = Perfect 2nd stage FPV experience
Sky Hero FPV racer motors, X2204 2300kv are the perfect power plant for your Anakin. Able to deliver 250W and spin 6" propellers on 4S, perfectly dynamic balanced, they are made with highest quality components like Japanese bearings and sh45 neo-magnets.
12mm wide and capable of delivering a sustained 20A on 4S they will stay cold even in the hardest conditions. Using the latest FPV racer technology (oneshot125, active breaking, and more) they will bring your Anakin alive.
Cc3d nano, the ultimate latest generation 32 bits flight controller, packed in an orange anodized aluminum box, pre-programmed and ready to use with openpilot.
The Sky Hero Link9 sbus receiver has everything you can dream of. 9 channel pwm output, 14ch sbus , internal telemetry for RSSI ( radio signal strength inicator ) and rx voltage readout, port for extra telemetry sensors ( gps, battery voltage ), and single button binding, all in a small package.
when flying FPV the camera is your eyes. It must be an excellent, no compromise product. Your bind ready Anakin is equiped with a pretuned ccd 800tvl camera. No adjustments needed here - high dynamic range, fantastic bright color, 1Mp 2.8 lens, low latency, and is all you need to win the next race.
Gemfam 6x4.5" Props are rigid and precise and are the perfect choice for the Anakin.
- (4) 2204 2300kv motors
- (4) 20A BLHeli ESCs (housed in the arms)
- 800TVL FPV Camera
- CC3D Atom flight controller pre-configured
- Receiver for binding with the Sky Hero Link9 Transmitter (Transmitter not included)
This product was added to our catalog on November 7, 2015.