SCRATCH & DENT: Team Associated RC10 B6.1 Factory Lite 1/10 2WD Electric Buggy Kit

SCRATCH & DENT: Kit is open and partially built. ONLY the shock bags were opened, and said to be missing a couple small parts. Besides that, this is a brand new kit to build or use for spare parts.
Sold as is, photo of product may not be an accurate representation of product condition. ALL SALES ARE FINAL.

Team Associated's RC10B6.1 has been met with wild success by racers across the globe. As good as that may be, the engineers of Team Associated's Area 51 became aware of the advantages that could be gained in certain track conditions by racing a lighter-weight B6.1.

Enter the RC10B6.1 Factory Lite.
Shedding over 45 grams of weight from the original B6.1D, the Factory Lite was designed to excel in classes requiring Spec motors, allowing the racer to take full advantage of the performance offered by the reduced weight. The Factory Lite sheds 30 of the 45 grams in rotational mass alone.

Parts used to achieve the weight savings include the MIP Pucks(TM) system, MIP Pucks(TM) 7075-T6 aluminum outdrives, MIP Pucks(TM) Bi-Metal(TM) lightweight R-CVD bones (67mm), Factory Team direct drive system, and a lightweight body.

Features:

• Direct drive system for reduced weight and better acceleration
• MIP Pucks 7075-T6 aluminum outdrives
• MIP Pucks Bi-Metal(TM) lightweight R-CVD bones, 67mm
• Adjustable diff height can be matched to various ride heights
• Machined pistons included for better fit and smoother operation
• V2 springs for a more reactive and nimble feel
• One-piece shock bushing to make assembly easier
• Molded spur gear guard to help protect body from damage
• 3-gear Laydown Stealth(R) transmission for lower and forward CG
• Innovative rear arm with molded inserts for ultra-fine lower shock mount adjustment
• Lightweight aluminum top shaft
• Aluminum C and D arm mounts included for a large range of anti-squat and toe adjustment
• Heavy-duty V2 routed graphite front shock tower with tower guard
• Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)
• Aluminum 7.0mm rear clamping hex with laser etching
• Aluminum 5.0mm front axle with adjustable height
• Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
• JConcepts(TM) lightweight B6 clear body and wing included
• Aluminum 5.0mm front axle with adjustable height

Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Needed To Complete:

• 1/10 scale 540-size electric motor & ESC
  
• 2S 7.4V LiPo (shorty pack, saddle pack, or square pack) Saddle Pack and Square can be used, but you must remove the battery strap ASC91731 -- the battery must be held in with 2 sided tape.
• Compatible Battery Charger
  
• 2-Channel Radio System
  
• Steering Servo
• Pinion Gear (48 pitch)
• Polycarbonate Paint (for body and wing)
• 1/10 scale Buggy Wheels & Tires
  
• Glue for tires and wheels

This product was added to our catalog on November 15, 2018