The Scale by Chris Wraith Drop Bed & Fuel Cell Insert is a 3D printed accessory that allows you to add a custom touch to your Wraith or Wraith 1.9. This drop bed slips in between the shock mounts, installs with M3 hardware through the shock mounts, and fills the empty void in the back of the cage with fuel cell and roto can details. The empty 52x53mm area in the middle, and small spaces on the right and left side allow you to stash additional accessories for a personalized touch. Plus, the fuel cell can be used to house your ESC, receiver, light controller, or other electronic device, for a clean electronics install that keeps things stashed out of site.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.